PDA

View Full Version : Problem with my first string job


Wong8Egg
10-28-2005, 10:46 PM
Hi guys, I have finally got my Eagnas EAG-860 machine this week. Everything looks pretty good and it took me about 3 hours to assemble and configure the machine. And it is all thank for the BFer advices that have helped me all the way, yet until now.

So I processed with my first string job today, that I am using the 4 knots 2 piece technique. I have got the main finished in a little bit over an hour, and now I have tied my knot at A7(right) ready for the cross. Problem is that I couldn’t get my string through the grommet at the left A7 where my main is sharing the same hole. I have tried countless of times, with bare hands or and combination of my tools I got. still no luck. Is there any trick or special technique to get that through? Given I only has a Tennis awl. Please help
Pete LSD
10-28-2005, 10:52 PM
Use waxed tooth floss.


Hi guys, I have finally got my Eagnas EAG-860 machine this week. Everything looks pretty good and it took me about 3 hours to assemble and configure the machine. And it is all thank for the BFer advices that have helped me all the way, yet until now.

So I processed with my first string job today, that I am using the 4 knots 2 piece technique. I have got the main finished in a little bit over an hour, and now I have tied my knot at A7(right) ready for the cross. Problem is that I couldn’t get my string through the grommet at the left A7 where my main is sharing the same hole. I have tried countless of times, with bare hands or and combination of my tools I got. still no luck. Is there any trick or special technique to get that through? Given I only has a Tennis awl. Please help
Pete LSD
10-28-2005, 11:01 PM
Here is one technique by Silentheart:

http://www.badmintoncentral.com/forums/showthread.php?t=24862&page=4&pp=18
Wong8Egg
10-28-2005, 11:50 PM
Use waxed tooth floss.

I don't quite get it, any pics?
LazyBuddy
10-29-2005, 12:14 AM
A7, you mean the bottom 7? If so, there 2 things I concern:

1. The main should be tied @ bottom 8.

2. The cross should be stoped by bottom 9, and tied @ bottom 6.
Wong8Egg
10-29-2005, 12:18 AM
A7, you mean the bottom 7? If so, there 2 things I concern:

1. The main should be tied @ bottom 8.

2. The cross should be stoped by bottom 9, and tied @ bottom 6.

no, I have just started the cross at A7 (the top).
LazyBuddy
10-29-2005, 12:26 AM
no, I have just started the cross at A7 (the top).

What racket is this one?

If ur racket has a pattern of even # of mains, then, u should consider tie the main knots @ A4, or A5 instead of A7, assume ur 1st cross go through A7. ;)
DinkAlot
10-29-2005, 04:24 AM
What racket? The cross start should be at A5 or A6. Here's a stringing diagram to help you:

http://img404.imageshack.us/img404/4453/yonexstringpattern3dp.gif
Wong8Egg
10-29-2005, 01:37 PM
I am using the Yonex stringing pattern and my racket is the iso 85 VF. I tied my knot at A6 and through A7 right and got stuck at A7 left. :(
silentheart
10-29-2005, 02:10 PM
I am using the Yonex stringing pattern and my racket is the iso 85 VF. I tied my knot at A6 and through A7 right and got stuck at A7 left. :(

Here are some pictures. PM me if youwant higher res. pictures.
Pete LSD
10-29-2005, 03:51 PM
Hip Hip Hurray to silentheart! No more awl :D . It's a crime to use an awl :p for shared grommets.
DinkAlot
10-29-2005, 06:03 PM
Hip Hip Hurray to silentheart! No more awl :D . It's a crime to use an awl :p for shared grommets.

Agree, 100%. :D
silentheart
10-29-2005, 06:32 PM
Agree, 100%. :D

PS. I still use my dulled needle. However, I will suggest needle is for sewing only...:cool:
psung
04-08-2010, 10:04 AM
I have to try this!
It took me ages last night struggling to get the string through those shared grommets!