View Full Version : Wishing to sell AT900T (x3)
Slicedbanana07
06-07-2007, 10:33 AM
Hello,
I have 3 armortec 900 techniques (4uG4) that I want wish to sell but for the right price. Wishing to deal within UK, but international is also welcome. Hpwever, since prices vary a lot around the world, I'm afraid that when currency converted it is significacntly lower than what I actually wanted. But anyway...
First AT900T
- Perfect condition
- no cosmetic or structural damage
- no abuse by me (not that kind of player)
- strung at 23lbs with 68ti
- Has a replacement grip of karakal kumfy grip (white)
- recently bought from centralsports.co.uk (have the invoices in my email to prove)
-Serial is: 6633364 190172UK
Lookin for around £105 delivery included (which is around a tenner, so racket is about £90) (extra £5 for international)
Second AT900T
- Great condition
- Small paint chip at 10 o'clock position (about the size of a crumb)
- no abuse by me (not that kind of player)
- strung at 23lbs with 68ti
- Has a replacement grip of karakal super PU grip (white)
- recently bought from centralsports.co.uk (have the invoices in my email to prove)
-Serial is: 6633384 190172UK
Lookin for £95 due to chip with delivery already included. (extra £5 for international)
Third AT900T
- Great condition
- Very small paint chips at 2 o'clock position on one side and 1 o'clock position on the other side.
- no abuse by me (not that kind of player)
- factory strung with 68ti
- Has a replacement grip of karakal kumfy grip (white)
- recently bought from centralsports.co.uk (have the invoices in my email to prove)
-Serial is: 6613054 100172UK
Again, lookin for £95 due to chip with delivery already included. (extra £5 for international)
Photos will come later, no battery in my camera, but I will take pictures of all my rackets showing the cosmetic damage that I have mentioned etc.
Thanks for reading this.
Leon (aka slicedbanana)
silentheart
06-07-2007, 10:58 AM
Hi Leon,
How can 2 of the racquets are JP coded when you post the dist code of UK?
Sorry for the question.
Slicedbanana07
06-07-2007, 10:59 AM
Prices in USD ($)
1st AT900T - $220
2nd and 3rd AT900T - $200
BTW, the grips have been used, and look a bit dirty (because they are white), but are still performing very well.
Slicedbanana07
06-07-2007, 11:01 AM
I meant to say they are made in japan. Sorry.
Centralsports only stock the highest quality yonex (imported from Japan). Sorry for the confusion.
removed "JP coded" from the description.
Slicedbanana07
06-07-2007, 11:25 AM
Thanks very much kwun.
Slicedbanana07
06-07-2007, 11:45 AM
Second AT900T
- Great condition
- Small paint chip at 10 o'clock position (about the size of a crumb)
- no abuse by me (not that kind of player)
- strung at 23lbs with 68ti
- Has a replacement grip of karakal super PU grip (white)
- recently bought from centralsports.co.uk (have the invoices in my email to prove)
-Serial is: 6633384 190172UK
Lookin for £95 due to chip with delivery already included. (extra £5 for international)
SALE RESERVED
Slicedbanana07
06-07-2007, 11:52 AM
PAYPAL is preferred method of payment
Sorry I forgot to mention.
Slicedbanana07
06-07-2007, 12:45 PM
Pictures for First AT900T
http://img185.imageshack.us/img185/4097/32603452zz0.th.jpg (http://img185.imageshack.us/my.php?image=32603452zz0.jpg)
http://img185.imageshack.us/img185/7021/11mj0.th.jpg (http://img185.imageshack.us/my.php?image=11mj0.jpg)
http://img57.imageshack.us/img57/7930/111qf9.th.jpg (http://img57.imageshack.us/my.php?image=111qf9.jpg)
http://img185.imageshack.us/img185/4403/1111ck1.th.jpg (http://img185.imageshack.us/my.php?image=1111ck1.jpg)
http://img444.imageshack.us/img444/7894/11111fm5.th.jpg (http://img444.imageshack.us/my.php?image=11111fm5.jpg)
Slicedbanana07
06-07-2007, 01:01 PM
Pictures for Second AT900T
http://img444.imageshack.us/img444/4038/65651003kz6.th.jpg (http://img444.imageshack.us/my.php?image=65651003kz6.jpg)
http://img444.imageshack.us/img444/5328/22pc5.th.jpg (http://img444.imageshack.us/my.php?image=22pc5.jpg)
http://img166.imageshack.us/img166/3269/222qs7.th.jpg (http://img166.imageshack.us/my.php?image=222qs7.jpg)
http://img112.imageshack.us/img112/7030/2222ta3.th.jpg (http://img112.imageshack.us/my.php?image=2222ta3.jpg)
http://img112.imageshack.us/img112/4783/22222fb6.th.jpg (http://img112.imageshack.us/my.php?image=22222fb6.jpg)
http://img507.imageshack.us/img507/3926/222222hf4.th.jpg (http://img507.imageshack.us/my.php?image=222222hf4.jpg)
http://img112.imageshack.us/img112/140/2222222zr7.th.jpg (http://img112.imageshack.us/my.php?image=2222222zr7.jpg)
http://img112.imageshack.us/img112/959/22222222vr1.th.jpg (http://img112.imageshack.us/my.php?image=22222222vr1.jpg)
Slicedbanana07
06-07-2007, 01:06 PM
Pictures for Third AT900T
http://img507.imageshack.us/img507/7936/55146206qd5.th.jpg (http://img507.imageshack.us/my.php?image=55146206qd5.jpg)
http://img508.imageshack.us/img508/8514/33xe6.th.jpg (http://img508.imageshack.us/my.php?image=33xe6.jpg)
http://img508.imageshack.us/img508/4743/333ay1.th.jpg (http://img508.imageshack.us/my.php?image=333ay1.jpg)
http://img413.imageshack.us/img413/8740/3333kk9.th.jpg (http://img413.imageshack.us/my.php?image=3333kk9.jpg)
http://img413.imageshack.us/img413/1975/33333xq1.th.jpg (http://img413.imageshack.us/my.php?image=33333xq1.jpg)
http://img505.imageshack.us/img505/6176/333333kr3.th.jpg (http://img505.imageshack.us/my.php?image=333333kr3.jpg)
Slicedbanana07
06-07-2007, 01:10 PM
A few pictures for all 3 AT900T
http://img508.imageshack.us/img508/663/12932312al2.th.jpg (http://img508.imageshack.us/my.php?image=12932312al2.jpg)
http://img505.imageshack.us/img505/3951/44wm9.th.jpg (http://img505.imageshack.us/my.php?image=44wm9.jpg)
http://img505.imageshack.us/img505/8223/444rv9.th.jpg (http://img505.imageshack.us/my.php?image=444rv9.jpg)
Man that takes ages.... :crying:
Hope that helps people who have doubts. Chips are not as bad as one may think :p
Slicedbanana07
06-07-2007, 03:08 PM
Second Armortec 900 Technique (6633384 190172UK) - RESERVED
First and third still available (though currently in talks of a potential buyer for the third at900t)
MING PARIS
06-07-2007, 04:38 PM
why you sell them all something no good about these racket?????
MING
Slicedbanana07
06-07-2007, 05:28 PM
Benny C asked me the same questions, so'll just post what i sent him in here.
There are 2 reasons:
1) I've fallen in love with the brand SOTX
2) SOTX is much cheaper and, if I ever break a racket such as the 900T, the cost of replacing is ridiculously high.
It almost makes you become more cautious when playing (for me anyway)
So the real reason is the performance to cost ratio. You get a lot more racket with a ~SOTX for the money you pay for them.
Nothing wrong with the rackets themselves or in general. They are absolutely great rackets, why else would I buy 3 of them (except for having spare cash? :D)
Thats just the reason, money. People when they have money, they go for the more expensive brand - fact.
Some people can't afford Yonex's, or at least the higher end stuff anyway. But there are people who have used Yonex and have tried other brands and feels that the performance of these non yonex brands are just as good and much cheaper making them a brilliant alternative.
I for one am the latter. Hope this clears any queries up.
Slicedbanana07
06-09-2007, 06:18 PM
Second at900t is back on sale as the buyer had a change in circumstances.
All 3 are still up for sale, although there is increasing interest for all 3. So if you are, please make an offer before they are all gone.
Many thanks.
iCe.WinterBoy
06-11-2007, 11:06 PM
that's $141 in Canadian Dollar.. decent price guys~
iCe.WinterBoy
06-11-2007, 11:08 PM
could u kindly compare the SOTX u r using with 4U AT900T? thx a lot ^^
Slicedbanana07
06-12-2007, 01:06 AM
that's $141 in Canadian Dollar.. decent price guys~
Hi, nothing here amounts to 141 canadian dollars....
Prices are stated in GBP (from the UK).
I have also converted the price to USD if you'd look carefully. (sorry for sounding harsh, but i dont want lots of PM explaining to people that they have misheard the price and think they are a getting a super bargain.
On another note: Second and third AT900T has just been reserved.
Only the best condition racket leftover (first). Interested, please pm me.
Slicedbanana07
06-12-2007, 01:14 AM
could u kindly compare the SOTX u r using with 4U AT900T? thx a lot ^^
Hey, I'm currently using a d500 and woven 12. While they are not necessarily the same racket, they are similar in that its the right kind of racket for me. Defensively I would say they are all very good. Personally the woven 12 tops it as it is incredibly fast for defense (as they are more all rounders compared to the 900). In terms of power, the d500 is easier to use and i can produce a little bit more power than the technique, though others may find this to be different for themselves. Reason for my finding is that the d500 is slightly heavier while still being very maneuverable.
Backhand shots are better with my technique (much more whippy and can generate a lot of power). D500 is easiest to produce power for clears, while the woeven 12 is hardest (but still ok), due to a stiffer shaft.
Overall balance, I feel the SOTX is best, particularly the woven 12. This is due to it having mid balance, while the d500 has a very slight head heavyness (almost not noticeable, but its there). Overall technique is the head heaviest.
The technique is a great racket, but cost is a big factor, and i would say durability is another, compared to SOTX.
iCe.WinterBoy
06-13-2007, 05:25 PM
Hi, nothing here amounts to 141 canadian dollars....
Prices are stated in GBP (from the UK).
I have also converted the price to USD if you'd look carefully. (sorry for sounding harsh, but i dont want lots of PM explaining to people that they have misheard the price and think they are a getting a super bargain.
On another note: Second and third AT900T has just been reserved.
Only the best condition racket leftover (first). Interested, please pm me.
sorry about that, I just converted the price in GBP you listed into Canadian dollar for the 1st racket.
Neil Nicholls
06-14-2007, 02:16 AM
sorry about that, I just converted the price in GBP you listed into Canadian dollar for the 1st racket.
1 GBP = 2.10368 CAD
you might have done Euro to CAD by mistake
calvino
07-13-2008, 07:30 PM
i realise this thread was open over 6 monhs ago but i was wondering if you still had a 4u at900t available.
i have a prefect condition 3u at900t. would you be interested for trading?
Athelete1234
07-14-2008, 08:05 PM
More like 1 year ago...
calvino
07-17-2008, 11:58 PM
would you be intereseted in trading with my at900t 3U? i'm in oz
calvino
07-17-2008, 11:59 PM
sorry disregard that!!!
Powered by vBulletin® Version 4.1.4 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.