Separate names with a comma.
Well... he travels between 2 cities across the country. So 1 in each city which makes more sense.
The 850 and the Alpha Ghost 2 were the other 2 machines I was considering to buy until I ultimately decided on the Victor VE-50pro. Out of my...
>Chef's kiss< Awesome upgrades. Impressive setup. Good lesson for all future stringers to start with a good base machine. If you truly enjoy...
Somewhat suspicious. Possibly believable if the seller is 1) Korean 2) Malaysian as the Jetspeed 10 was used by some players on both national...
If it's only the padding that needs replaced and the post itself is still useable you could just buy a 3rd party load spreader to put on it.
Please confirm, the difference between the two grippers is: New - 3 prong male connector? -> are 3 wires used for this connector? Original - 2...
can you also include a picture of the old gripper (underside) to see how it connected originally as comparison? I figured the wiring would be the...
Tagged and linked you to this thread: https://www.badmintoncentral.com/forums/index.php?threads/tension-head-gripper-issue.191567/
@AdamMorin - here's the thread about PTFE lubricant for the gripper.
hmmm.. so the support arm is slightly misaligned. i guess disassembly is under the silicon pads at the head and throat. How un-Canadian of me to...
You definitely have a more economical solution. I didn't have that issue but instead replaced all the supports with a badminton specific C...
So when you press the button to release the tensioner the gripper doesn't automatically slide back releasing the string? Very odd. As reference...
I personally haven't experienced it yet. I agree that the manual that came with the machine lacked cleaning and maintenance instructions. As a...
@kakinami - pretty sure i can find it on ali. i definitely want at least a full set of 8.
I got my hands on a 4UG5 DX10 and tried it for a few weeks. Dry weight specs: 83.0g with balance point: 307.9mm String: Exbolt 63 @ 26 x 28 lbs...
As you know based on my previous machine I'm never satisfied and i like mods. I ordered these badminton supports (recommended by @s_mair)...
Yes, I was wondering why you didn't release the original clamp with no tension so that the wise would continue pulling before you clamp the 2nd...
both your logic and alan's regarding double pulling to start cross makes sense to ensure there is tension on the clamp that will be the "anchor"...
I always cut the tails off AFTER releasing clamps for your very concerns of possible knot slippage. "After" could also mean upon completion of the...
Nice find. On a different note, the background music for the video sure sets you into a different kind of "mood". Just you, the machine and a...