Thanks for visiting us!

Badminton Central is a free community for fans of badminton! If you find anything useful here please consider registering to see more content and get involved with our great community users, it takes less than 15 seconds! Everybody is welcome here.

Click here for a FREE account!

Stringing a Sotx Woven 2 (Power Boss) - 4Knots

Discussion in 'Badminton Stringing Techniques & Tools' started by mg27, May 6, 2005.

  1. mg27

    mg27 Regular Member

    Joined:
    Apr 29, 2002
    Messages:
    34
    Likes Received:
    0
    Location:
    Edmonton
    I was stringing the crosses and when I got to the last hole for the tie-off knot, there was no room to slide the string through. It seems that the hole
    sizes are not the same throughout the racquet (especially at the 6th holes from the bottom of the racquet ).

    I noticed that when I bought the racquet, the strings were done with 2-knot method. I don't think the racquet allows you to tie 4-knots unless you want to tie the knot around the 9th or 10th hole from the bottom.

    I used an awl but it still didn't work as there's not enought room to slide a string through. I can't see any light through the hole unlike my Yonex racquet where I still see light through the hole when there's a string through it.

    I've never had this problem before with the Yonex's I've strung, so this must be something unique to the Sotxs.

    mg27
     
  2. Alexccs

    Alexccs Regular Member

    Joined:
    Sep 26, 2004
    Messages:
    214
    Likes Received:
    2
    Occupation:
    Stringer ES5protech
    Location:
    NYC

Share This Page