Seeing how there are videos of various stringers, I thought I would finally share a video of myself performing a string job. Comments and questions are welcome. I accept all form of feedback, and would like to know better ways of improving my stringing skills Stringing Details: Stringer: xZhongCheng Machine Setup: Prince Neos 1000 Pro Pro Swivel and Base V2 Pro Pro Badminton Clamps Custom throat blocks to raise the height to accommodate the Swivel Clamps Mod Wise 2086 Settings: Constant Pull & Prestretch 10% Racket: Victor Brave Sword 12 KRP String: Yonex BG 80 Tension (main x cross): 28 x 31 lbs Method: Haribito Stringing Pattern Start off the crosses using 31 Pounds Finish 2nd last cross with 28 Pounds Skipping the a cross, going to B7 instead of B8, simply for stringer's signature. Last cross is pulled at 31 Pounds to allow for less slack on tie off. Tied off using Kwun's No Tension Loss knot. Short side all strung at 28 up to 2nd last cross Last cross on top is pulled at 31 Pounds to allow for less slack on tie off. [video=youtube;9f3jGnJglw4]https://www.youtube.com/watch?v=9f3jGnJglw4[/video]
nice! i am especially impressed by the highly modded Neos with swivel clamp. are those wooden block at the end? looks very sturdy with reasonable amount of setback despite the lack of support in the mid portion of the base track.
Yes. I have shaved down the blocks to be the same height as the mid portion of the table. there are holes under each block which allows me to screw it in to hold it in place. Cutting the blocks and shaving it down to match its exact height is the biggest challenge. I personally love the neos 1000 because it makes stringing much easier.