Results 1 to 17 of 26
Thread: VOltric 5 vs armortec 70 MEGA
10-02-2011, 12:50 PM #1
VOltric 5 vs armortec 70 MEGA
I wonder, can anyone help me choose? i have been browsing around the forum, but not enough details about each racket, thus, here i am making a new thread about it.
ive heard that the VT series replaces the armortec series.
Does anyone know when the prices will drop for the armortec then?
That would be nice because i could just buy the armortec 70mega and save myself a few dollars
VT 5 = 100$ CDN
Armortec 70 mega = 110$ CDN
Which one would you pick? And why?
Hard to pick,for me,when they both are head heavy and i cant even try them off because i have to purchase it before doing so... and there are no refunds.
I dont want to pick the VT 7 because, ive heard the paint chips off easily just in one clash, well, in what ive seen in the forum so, it would be harder to sell it back when i dont want it anymore.
Anyways,Thanks for your replies.
10-02-2011, 04:26 PM #2
All Yonex nowadays, made in Taiwan or not, have poor paint quality in comparison with Li-Ning and Victor racquets. I play those three makes and I can tell you having difficulty to find paint chips on Li-Ning & Victor racquets I play in men doubles, when my Armortecs have all bad wounds…
For me, if you don’t go for VT7 for this, you’re making a mistake, as it’s a far better racquet than VT5 or AT70 Mega G2.
However that may be, VT5 is already better than AT70 Mega G2 in all domains, starting with shot precision, which is not difficult in comparison with an AT70.
10-02-2011, 11:22 PM #3
Could you tell me why is the VT7 is better than VT7?
Other than the weight.
10-03-2011, 12:15 AM #4
VT7's frame mainly: it is made in HM Graphite when VT5's frame is only in carbon.
This gives far more stability, precision and less vibrations to the VT7.
In fact I would see the VT5 as the AT50's replacement. Same head heavy carbon racquet with tungsten inserts in the frame (Voltric system).
10-03-2011, 12:49 AM #5
Some people have complained about VT7's vibration and instability though.
And in Paul's badminton blog, he said VT5 felt much nicer than VT7.
10-03-2011, 01:26 AM #6
first of all I'm not those super pro player la.... but I got AT70MG2 eh..... its a forgiven racquet though.... larger head frame. even balance + abit head heavy enough for the play. for me i feel it is an easy to use racquet. Overall i also like that racquet AT70MG2, i always use it b4 i buy VT80. xD
I dont have victor, lining or VT7 or VT5 ..... that one i cant help
10-03-2011, 03:52 AM #7
@observer: you're right AT70 Mega MG2 is a nice racquet for beginners, where it is lacking it's mainly on the precision side.
For that, VT5 is better; this is all I'm saying.
@KinkySmasher: I am saying that VT7 is better than VT5, to answer aznb3n question, on the precision and stability chapters; it doesn't mean that VT7 is the most stable and precise racquet ...!
When it comes to Paul's reviews, he is no bible as he says himself.
Personally I don't want to be sponsored by anybody so I may test and pick the best racquet at all times.
10-03-2011, 04:23 AM #8
if given me second chance, i will spend the RM200-300 to buy a high end victor racket
10-03-2011, 04:30 AM #9
It depends where you are. If you are in South East Asia, I'll do the same.
I am not sure that in Canada you will have the same deal for Victor racquets....
10-03-2011, 05:00 AM #10
Then Just go for voltric since Paul gave quite a good review on Voltric series
and also one thing in future Armortec series might be replaced with Voltric.
10-03-2011, 08:49 AM #11
10-03-2011, 09:03 AM #12
How may I answer such question ?
Of course, or would I bother talking about them ?
10-03-2011, 06:08 PM #13
So, if i get this right
Armortec 70 Mega, is a good racket overall, but its not better than VT 5 or VT 7, even tho the head is almost the same weight.
VT 7 is superior because the frame is made of H.M Graphite
High modulus means its more stiff, i presume
but like kinky said, ive read about the reviews too, about the vibrations and such.
Now im not sure which one to pick ,its rather confusing.
I'm using a racket now, and its full carbon, no problems here, but i did try H.M graphite and it did feel like it was vibrating. I tried the arcsaber 10, not sure if it was my technique, or not but the racket felt good, until i hit the shuttle, the racket felt all weird. My friend said the racket was hand stringed, so that could be one of the reasons but i dont know... the frame and then the shaft felt like it was a on vibrate for a split second.
I'll be doing some thinking on which racket to choose... this is really confusing
10-03-2011, 06:09 PM #14
oh and thanks for all the comments so far
And keep posting comments about the rackets, it might be of help. :P
10-03-2011, 06:17 PM #15
New racket added to the list; Arcsaber 003,
Let me hear your opinions compared to the VT5- VT7 ,
Armortec 70 Mega is excluded. Thanks
10-04-2011, 06:13 AM #16
AS003 is an Arc Saber, so merely no head weight, this racquet being more on the control side.
It has an over sized frame similar to certain Forza OZ racquets (Ti300, for example).
It depends what you're looking for: singles, doubles, what type of racquet you're used to.
10-04-2011, 05:16 PM #17
i kind of play both, singles and doubles. so... yeah... but i could probably adapt to the rakcet after using it for a while , probably.
btw, thnx for all the replies.
you could recommend another racket but within the budget
By Wai Lam in forum Racket Recommendation / ComparisonReplies: 3: 10-20-2011, 11:18 AM
By SantaSCSI in forum Broken RacketsReplies: 1: 10-02-2011, 12:32 PM
By aramistuscany in forum Badminton Rackets / EquipmentReplies: 4: 12-31-2010, 10:44 AM
By icearmour in forum Buy & Sell - Read the rules sticky before you postReplies: 2: 05-19-2010, 11:29 PM