I'm planning to get one of these rackets but having trouble deciding which is good at smashing and which one is stiffest to least stiff? Which one is easy to clear? Which one is head heaviest?
@ visor & Ambushes In terms of Power & Maneuverability, Could you compare MX70 & MX80? I have never tried MX 70 before. Thanks a lot.
Here, I compared them a while back... http://www.badmintoncentral.com/for...116-Victor-MX80-vs-MX70?p=1764641#post1764641
Never tried the MX70 but i've read on BC that it's simply a more flexible MX80. I known the MX80, and it's definitely the stiffest racket i own. Either way, it is very quick, but for beginners-intermediate i'd recommend MX80 would most likely be difficult to handle.
xD i own arc 10 PG 3U, VT80 LTD 4U and planning to get either MX-70 or MX-80 after chinese new year... or wait for MX-60
Know its an old thread, but I am facing the same question. Have been playing with Arc10 for long and looking at an MX70 now. Only doubt is the stiffness, Some say it is comparable to Arc10, so its ok. Others say MX70 is way too stiff compared to Arc10 and will be equal to BS10(slightly less than MX80). Which one is right? If it is only slightly less than MX80, I wouldn't go for it. But if it comparable to Arc10(a slight increase is also fine), then I would go for MX70. Advise please guys. note : Know about the victor dot system for stiffness; but it had only confused me.
I'd get either an MX60 or Kason TSF500. For me over the part 18 months of trying over 20 rackets, these have been the best all-round circa 300mm BP rackets I've tried. There's probably others, but I haven't tried them so can't comment Going from an Arc10, you'd probably find the MX70 or BS10 the next level up in stiffness.
Thanks mate... I don't want anything more stiffer than Arc 10. I prefer playability throughout the games; so if MX70 is same stiffness as BS10, then I wouldn't buy that. So its either an MX60 or a spare Arc10 for me.... Mostly MX60