Results 154 to 170 of 211
05-14-2012, 01:24 PM #154
so i saw something earlier about the 10% rule for the cross and mains, are you using it for this machine? what have you concluded?
05-14-2012, 02:24 PM #155
05-19-2012, 05:40 AM #156
Ti-10 Gen2 strung 22x22 pattern, tension is 27lbs x 27lbs. usually with aftermarket load spreader there is no space to weave the top cross and it ends up bent. with the Gamma end support there is tons of space left.
the only drawback might be it is 3 fingers instead of 5. but so far there seems to be no problems.
05-19-2012, 07:57 PM #157
Wonder if the Babolat rackets will have problems... 20 mains means the holes are spaced wider, and they certainly make a mockery of my MBS load-spreaders.
Side-note - I'm furious you chose a Ti-10 yellow; I've been after one of those for a YEAR now!
05-19-2012, 08:24 PM #158
babolat badminton racket has tennis spacing: the strings are closer on the middle than on the sides. so it is not a problem at all. even if it is uniform spacing, 10% is hardly of an issue.
and i verified it with my Babolat.
05-24-2012, 04:01 PM #159
i have since strung 25 rackets on the new end support. rock solid. no issues with it at all. the thin profile makes weaving the top cross a breeze and it never gets in the way nor have a string tangles on the teeth.
06-29-2012, 10:17 PM #160
I am currently using the Eagnas Combo 810 - crank machine with Michal's Side Support, if I happen to have budget for upgrading;
Do you recommend to upgrade the turn-table to Gamma (6-points) and continue using the crank or stick to the current setup, with WISE 2086?
As you know, Strinigng is an expensive hobby and not really making money, so any investment must careful.
06-29-2012, 11:48 PM #161
dollar by dollar, the electronic head for $500 will be much better than upgrade to the crank than the $1300 Gamma turntable + stand vs. the Eagnas turntable.
06-30-2012, 01:44 AM #162
... just buy the WISE2086 and put into your machine ...
Actually if you could find 3 guys and join together to purchase it, it may be cheaper ...
You may contact moongose (mustafa) who living near CCK area, also sgbad so can join together with them to purchase it ...
Wise2086 is a good head, but once you have a problem, you will be finished, coz you are very far from the seller (in the US).
07-10-2012, 01:00 AM #163
07-10-2012, 03:00 PM #164
07-10-2012, 03:53 PM #165
I JUST BOUGHT MYSELF THE GAMMA 6004!! strung 20 rackets so far, this machine is very solid, Loving it
09-05-2012, 12:27 PM #166
Kwun, killer pics and set up. Love it.
12-30-2012, 02:42 PM #167
01-01-2013, 08:00 AM #168
01-03-2013, 02:03 AM #169
Eagnas Combo 810 with Chudek's Side Support and Tennishead 2086
Wheels was removed due to the height is too much for me.
Still tempted to get Gamma 6004 though
Removed the Eagnas Fixed Clamp, MBS Flying Clamp still the best !!!
Strung 30x rackets with ease and never regret getting this
Playing Location no longer at CCK Sports Hall, we shifted to Unity Primary School (We miss you, Maa2003!)
Stop for a while already, maybe should start again soon as watching own play can really improve
03-31-2013, 12:47 PM #170
By cokonut in forum Buy & Sell - Read the rules sticky before you postReplies: 6: 11-16-2011, 02:37 PM
By rebound7 in forum Buy & Sell - Read the rules sticky before you postReplies: 3: 11-16-2011, 01:24 PM
By henryix in forum Badminton Stringing Techniques & ToolsReplies: 72: 10-22-2011, 11:31 PM
By badmad in forum Badminton Stringing Techniques & ToolsReplies: 3: 09-01-2011, 06:12 PM
By jkamera in forum Buy & Sell - Read the rules sticky before you postReplies: 0: 01-18-2008, 03:34 PM