Results 35 to 51 of 211
03-31-2012, 04:47 PM #35
03-31-2012, 04:59 PM #36
What about that 35 lbs string job?
03-31-2012, 05:20 PM #37
03-31-2012, 06:21 PM #38
I would like to add that stringing a tennis racket with the 6004 is a no brainer. Very straight forward task.
03-31-2012, 08:10 PM #39
now, onto my new MX80, SW35, and UltraPro... hehe.
03-31-2012, 08:15 PM #40
btw, does anyone put oil on the base clamp track? mine seems a bit dry and the sound is a bit scratchy. i wiped a layer of oil on it and it seems smoother though.
too bad i don't think it will ever get as smooth as the ES5Protech.
03-31-2012, 11:53 PM #41
Do me proud. Get that ZM70 onto the Ultra Pro at 35 lbs of tink-tink sound.
03-31-2012, 11:53 PM #42
04-01-2012, 12:00 AM #43
Looks very nice! Perhaps one day I'll get a fancy machine like this when I've grown old and moldy
04-01-2012, 12:14 AM #44
TimothyHsu liked this post
04-01-2012, 12:24 AM #45
on cross. this actually looks pretty good but the spacing for the SW35 is slightly narrower than some Yonexs.
this is the spacing at the 11th main near the support with the Yonex pattern. it touches the side support a bit and that nudges it slightly. as a result the string isn't completely straight but pretty close to it.
if you look closely the clamp is tapered near the corner so if the support isn't there it can get pretty close to the grommet.
if you look closely there is a little tap that sticks out near the taper. i am not sure what function that do and i might just file it off if it bother me too much.
this is near the tie off on 10th. the thickness of the clamp just fits in between 9th/11th. not bad.
you can see that little tap again.
and this is how the compact clamp fits into the gap between the support and the frame when tying off cross at 7th. while i think it is possible to have it all the way to the grommet, the risk of it slipping is too high as it means it will only be clamp the string at the finger tip. which is ok for thicker string at lower tension. this is 0.62mm@29lbs so it is not worth getting it so close.
and this is how it works with tennis spacing:
overall i think Gamma has a winner here. the new universal clamp actually fits badminton really well. the size is very compact and while things don't go tightly flushed, it is close enough in most cases. the action is not as light as say Yonex clamps but it doesn't come with a $8000 machine either.
Alexccs liked this post
04-01-2012, 12:31 AM #46
04-01-2012, 12:53 AM #47
hi kwun ....
could you take the picture from behind the Wise2086 ?
just wanna see whether the Wise2086 position is slant or not for the new adapter ....
04-01-2012, 01:01 AM #48
04-01-2012, 01:15 AM #49
as for the Gosen and Prince... do you mean the GM660? i believe that's badminton only. i cannot find a pic for the GM600 though it has been referred to on some webpages.
as for the Prince, it is nice looking machine and at a decent price also, there are two reservations i have:
- it is mainly designed for tennis with tennis dimensions.
- the support posts are not adjustable. what this means is that the distance between side supports are not adjustable and since this is designed for tennis, it will be too wide for badminton.
when looking at tennis machines, one of the most important factor for badminton is that it needs to be 6 pt support and the posts needs to be adjustable.
04-01-2012, 01:22 AM #50
i didnt noticed abt the non-adjustable condition of prince machine....
how abt gosen GM08EX, any idea abt this machine
btw, which site shld i refer to, for a better bargain of machine....
as this gosen machine will cost me abt RM 20k (in malaysia)
04-01-2012, 02:55 AM #51
By cokonut in forum Buy & Sell - Read the rules sticky before you postReplies: 6: 11-16-2011, 01:37 PM
By rebound7 in forum Buy & Sell - Read the rules sticky before you postReplies: 3: 11-16-2011, 12:24 PM
By henryix in forum Badminton Stringing Techniques & ToolsReplies: 72: 10-22-2011, 10:31 PM
By badmad in forum Badminton Stringing Techniques & ToolsReplies: 3: 09-01-2011, 05:12 PM
By jkamera in forum Buy & Sell - Read the rules sticky before you postReplies: 0: 01-18-2008, 02:34 PM