Stringway ML 90

[Jurong]

I have a Stingway ML 90 and would like to know if I could attached a Wise 2086 to this machine, if it can be done, how difficult is it to do, I ask this because, I am not a very Handy-man type of person.
Hope to hear from all BC stringers soon.

[yan.v]

As far as I know, the Wise 2086 can only be attached to Crank system machines and your machine is a drop weight machine, so you can't.

[Alex82]

As far as I know, the Wise 2086 can only be attached to Crank system machines and your machine is a drop weight machine, so you can't.

this is not correct. i have a dropweight machine and attached a wise machine...

[yan.v]

Oh yeah there's an adapter for that! Sorry!

[phili]

I would just email them, they should know best

[kwun]

the key is can you take off the drop-weight part easily? if so, then you are golden. the worse that you will have to do is to drill a couple of holes to mount the WISE drop weight adapter. you might not get 360 depending on how high the turntable sits on top of the base.

[Pete LSD]

I would keep the Stringway drop-weight mechanism and transplant it to a modern six-point machine.

[Jurong]

I would like to thank Kwan, Yan.v, Alex82 and Phili for your input regarding the Wise 2086, I have decided to contact them and go from there.
Thanks once again guys.

[kwun]

good luck with it! and don't forget to post a photo/video when you are done with the mod.

[Distanc3]

i like that idea but which modern 6 pt machine?

[Pete LSD]

Certainly not Eagnas turntables. Maybe a W&D 3600?

i like that idea but which modern 6 pt machine?