Results 35 to 51 of 55
08-14-2012, 09:19 AM #35
here is one for Forza 88-hole.
08-20-2012, 05:35 PM #36
anything for Karakal?
09-05-2012, 02:49 PM #37
Regarding the 88 holes stringing technique, is there a 4-knot method or should I go with the 2 knot?
And if so, how much length does the sides need since it is clear that the left side is also being used for the crosses?
09-06-2012, 12:19 AM #38
Keep in mind that the pattern above requires you to clamp the last strings on the mains which may be difficult - check your machine to ensure you can clamp on the outside before using this pattern - otherwise, you will find a significant tension loss when tying the knots on the mains.
09-06-2012, 03:24 AM #39
11-15-2012, 05:25 PM #40
Anyone have the pattern for Li Ning BP300B. This frame has the 2 hole groove near the middle of the frame like the old traditional wooden badminton and tennis racquets. Should I go one piece or two piece string job?
Thanks for your help.
12-04-2012, 06:08 AM #41
Ashaway 84 holes racket
I got ash. BF Light 84 holes racket. Can I have the stringing pattern for this racket. Thanks
11-19-2013, 03:01 PM #42
Standard method for all
Hi, is there such a thing as standard stringing pattern for all racquets? I'm curious as to what stringing pattern should one use for Apacs, Yonex and Victor racquets.
11-19-2013, 03:28 PM #43
No - but usually all patterns will work on racquets but you need to adjust a little to accommodate for the number of holes.
11-19-2013, 03:53 PM #44
Ok thanks. Is there a fast and easy way to know how many holes are in a racquet or must I go about the long way and count the number of holes?
11-19-2013, 04:02 PM #45
If you have strung tons of racquets, you can usually tell if there are more holes on the racquet. When working on the mains, you'll see some additional cross grommets near the sides if the racquet has more holes. The additional grommets are always on the "corners" of the racquet at 11, 1, 5, 7 oclock positions.
11-19-2013, 04:05 PM #46
Hey thanks again. No, never strung any racquet but thinking of getting into stringing. Hence, the questions.
Are all grommets the same or if I break the grommets on a certain racquet, I have to use the same size/type?
11-19-2013, 04:14 PM #47
Sorry - maybe more like 10/11, 1/2, 4/5, 6/7 o'clock
11-19-2013, 04:14 PM #48
11-27-2013, 04:56 PM #49
I just wanted double check, can I use the VT80, VT70 &VT60 stringing pattern for a VT 5?
11-27-2013, 10:02 PM #50
12-24-2013, 05:03 AM #51
I have a 72 hole Carlton, anyone have a pattern suitable for it?
By TsAr83 in forum Badminton Stringing Techniques & ToolsReplies: 7: 04-22-2011, 02:40 PM
By noppy in forum Badminton Stringing Techniques & ToolsReplies: 4: 01-09-2010, 03:50 AM
By logi in forum Badminton Stringing Techniques & ToolsReplies: 7: 04-24-2008, 09:47 PM
By silentheart in forum Badminton Stringing Techniques & ToolsReplies: 8: 08-04-2006, 10:20 AM
By Vic in forum Badminton Stringing Techniques & ToolsReplies: 4: 11-16-2001, 09:53 AM