I traded it with one of the BC member
when i start playing with this racket ,its feel different from original voltric 80 that i had try with my friend racket, so starting to curious
The Yonex logo was damaged , the person said because he wrapped the grip until the top of the shaft , so its start to peel off
the at the frame he changed , idk what is it (the red one) but he said to get the frame get higher tension
cone: 281202 sp
thx so much
I have seen fake NS9900 and Arc10, Ti-10. I am going to show some person ideas to you.
From the T joint and bottom cap. It is not very clear i can not confirm but It seems to be quite real... Peel off is not the factor on fake racket. There are other points to clearfy:
1. Bottom cap: The real racket bottom cap is very sharp on the white logo. The material of the green portion is a bit soft compair to the white portion. You can press by fingernail on the green portion and it will leave a mark. The green portion of the fake Yonex racket is a bit hard and it is not easy to leave mark by fingernail.
2. shaft: The shaft of the fake (VT80, 900 serious, Arc 10) is not very stiff compair to the real. You can feel it when you smash or hit to the base line.
3. Someone told me on the code but from what i have seen before. I can not see is there any difference.
Anyway, I suggest you to compair with another real VT80 on hand. From the 3 fake racket i seen before, it is clear that you compair to the real racket on hand.