hello I bought 2 monts ago a carlton prototype v1.1 but the string was terible. So i wanted to restring it and removed the string of the frame. And i fixed the racket frame in my stringing machine to re-sting it. but i could not re-string it because it is a strange patern. So my question is have someone expirience with stringing a carlton Razor or prototype ? Or have someone a stringing patern for those rackets? thanks
Hi Goto http://www.carltonsports.com/docs/badminton/products/rackets/razor_v10.php Zoom to it Seems they are using single-piece method bottom-up. The bottom cross string is 8, the bottom tie-off is on 7th main. The top tie off is a bit hard to find - it is on the 8th main between the last two top crosses on the left. I think the crosses must be started the one way only - this cannot be seen from the picture - I think you need to calculate it by yourself. So put the racket in the machine as it is on the picture and make sure: mains short end has tie off on the left the first weave of the bottom cross is correct Hope this helps Valentinas
thanks for u awnser. meanwhile i was been able to string the racket by a regular 2 string patern. But i hope the string will have a long life time.