Results 1 to 17 of 27
02-07-2013, 09:39 AM #1
Can a stringing newbie easily install a WISE 2086 on a crank machine?
I posted a question here a while back and I have finally decided to go with a crank machine upgraded with a WISE 2086. The only thing is that I'm wondering how easy it is to install the WISE myself. I've read that with cranks you don't need any additional work, and I've seen a youtube video of someone installing one by simply slotting the WISE on the rails of a crank machine...but is there anything else that I should know when installing it?
At the moment I have found two options, the first would require me to install the WISE myself but the second comes with it already installed:
Any opinions on machine selection are also welcome
Note: my previous thread
02-07-2013, 12:45 PM #2
Hi. I bought the Electronic 3600 last week and had to put it together, it doesn't come pre-assembled however it does come with all the parts you need to put it together. The manual was very cryptic but I eventually got there.
All it is to attach the 3600 is 3 bolts at the back... that is it.
The WISE 2086 came in it's own box and had the adapter plate to install it on a crank machine.
To be fair it looks pretty simple now to put together.
Just to add I bought some additional things along with the machine to improve it:
Fixed Badminton clamps
MBS Load Spreaders
Side Support - they are rated 10/10 so it's a must for me
Last edited by vienly; 02-07-2013 at 12:49 PM.
02-07-2013, 01:27 PM #3
both options involve simple assembly. anyone with basic skills with allen/hex keys should be able to follow the procedure.
i think the decision is more down to whether you want a tabletop machine or a upright one.
02-08-2013, 05:40 AM #4
I have the XP Plus and Wise machine and it works a treat. You have the stand that comes with the XP Plus stringing machine and the Wise head just slides on to replace the crank mechanism.
Plus, you have the crank tensioning mechanism if the Wise breaks down (just in case - a backup).
02-08-2013, 06:25 AM #5
02-16-2013, 11:26 AM #6
Just a quick update - I received the machine yesterday and it was fairly straightforward to set up. I spent just under 2 hours stringing my first racquet this morning (lots of silly mistakes at first)
For anyone else wondering about the Pro's Pro XP Plus I'd say it does the job ok but it definitely feels more tennis oriented. This is because of things like fiddling around with the side racquet clamp points (too loose) and difficulty using the fixed clamp on the top cross. You get what you pay for I guess!
02-16-2013, 11:40 AM #7
2 hours is around right for first time. it is not a difficult process but there are many unknowns when going through it the first time. there are tons of videos that we have made and it is nice to go through some of them to get a feel for the process.
02-17-2013, 07:53 PM #8
I have the Pro Pro plus and WISE 2086 setup for two and half years and strung just over 400 rackets from various manufacturers. It works fine with the frame supports, but the frame supports of the small edges for badmintion rackets are used; of course the racket is needed to be adjusted to prevent the supports blocking the grommets holes especially the shared ones. There are some alternative slim frame supports specially made for stringing badminton rackets. The Dual Clamp 5-prong from W&D are most important parts needed for the consistency. If you have the other Pro Pro plus for badminton ones (the ones with 3-prong), they are unreliable ones, they strip the strings and make kinks on the strings. MBS load spreaders are recommended but not necessary, small amount of rackets have closer grommets holes at the throat. Flying clamps are handy for some unusual rackets. Of course, your stringing skill will improve.
The problem with the loose frame supports on the top of the rackets because the restriction of the arms cannot move inward any further, especially for the oval shaped old rackets. There are two ways to solve the problem: the first one, a yonex flying clamp is used because it has sharper prong; the second one, the first two rows is clamped at the second row (making one clamp for the first two rows). The frame supports are used to hold firmly but not too tight. Hope it helps.
02-18-2013, 07:07 AM #9
02-18-2013, 07:31 AM #10
My brother and I have been having problems with the side frame supports not moving in far enough to support most racquets. I will have to play around with the positioning of the frame supports as you suggest, although I don't fully understand your first solution with the fly clamps Any chance that you could post a picture of what you mean?
02-18-2013, 09:27 AM #11
02-18-2013, 05:15 PM #12
Stringing my first racquet which is also the very first racquet that I bought. Strung @22.5lbs but it feels tighter than my local shops 26lbs which is a crank.
You can see the modification to the racquet side clamp that we tried...although I'm not too comfortable with it since that racquet was distorted when it was taken out, he says it's from the string snapping (my bro's one)
My bro stringing @26.5lbs, although he's already snapped the string twice! Once because of a sharp grommet and another because of some clamp problem.
Lessons already learnt:
- make sure the clamps are always tight enough (string and racquet)
- make sure the clamp on the tensioner is tight enough (BG66UM kept slipping off at first)
- make sure you always lock fixed clamps in place after tensioning the string
- check grommets for damage before stringing
- for the Wise tensioner you have to lock the string in place by pushing the plates towards the racquet (honestly had no idea about this at the start) and can press the small red button to tension
- you can turn the Wise tensioner sound off by pressing lbs and down arrow, and I think to turn it on kg and up
- expect to make many mistakes!
Last edited by ant01; 02-18-2013 at 05:17 PM.
02-20-2013, 01:59 AM #13
02-20-2013, 02:18 AM #14
Last edited by beelebala; 02-20-2013 at 02:28 AM.
02-20-2013, 02:50 AM #15
02-20-2013, 03:26 AM #16
Do you think they have the confident to adjust the mechanical setting of the machine?
02-20-2013, 03:30 AM #17
They are not even sit the racket properly on the machine. They try to get best out of the machine quick but not in a controlled manner. I know "the failure is the mother of success".