Results 1 to 17 of 18
02-24-2013, 07:44 AM #1
VIDEO: Adidas Power Hybrid (+ Victor SW35) stringing
Having completed the play testing of all the rackets i received from Adidas, i have started testing the strings. upon requests i started with the Power Hybrid. below is the video of the stringing process.
the string came with the main and cross separately tied. the main is white, and cross is yellow.
the thing that really struct me is that the string is super slippery. so slippery that my gripper had problem gripping it. it is spec'ed to be a 0.72mm mains, 0.69mm cross string. at the previous gripper setting, it was able to grip the 0.62mm Zymax with no problem at all. but at the same setting, it slipped on the 0.69mm cross string. i had to go get my tools to readjust the gripper plates to accomodate for that.
the good thing with that is it is very easy to pull the string as there is much less friction. initial feel of the string is that it is stiff. and that is confirmed by the play testing that i did in the evening.
besides that, there isn't much else different with stringing the Adidas Power Hybrid.
02-24-2013, 07:51 AM #2
How did it play?
02-24-2013, 07:55 AM #3
02-24-2013, 08:06 AM #4
Apologies if O/T, but I really cannot see the point of a badminton hybrid - the racket/shuttle interaction is almost totally isotropic, and there is no way to play power with spin like in tennis.
kwun, feel free to move this post into the appropriate "Badminton Strings" thread when one appears for this string.
02-24-2013, 11:25 AM #5
02-24-2013, 05:59 PM #6
If someone as experienced as the moderator of Badminton Central needs to "spend more time with it to really understand the benefit" then I really doubt that there is much spectacular benefit to be had.
02-24-2013, 08:11 PM #7
ok. so power is pretty good, really good, actually. but the string is too slippery. for shots like drives, while it give the shuttle good velocity, i have trouble inducing enough spin on the shuttle. sometimes that means it goes higher than i expected it to.
today i managed to spend more time doing different warm up drills with different people to get the actual feel of the string. i think i have enough data to write up a report.
and along with finishing the precision 88 review and the switch pro review.
who says these Adidas samples are "free"?
02-24-2013, 08:51 PM #8
02-25-2013, 02:41 AM #9
but the point remains the same. i can only evaluate the hybrid string as it is and unless i am able to some A/B compare with and without hybrid, it would be hard to make much out of the "hybrids". and as it is today, it didn't make a 'wow, this hybrid really stand out' type of impression.
02-26-2013, 11:41 AM #10
the stringing machine sitting on carpet is not sitting very stable. i can see from the video that it is rocking around when i string. i'd prefer it more stable and it will look better for video taping purposes too.
anyone has suggestion how to stabilize it? maybe spikes?
04-24-2013, 10:50 AM #11
^^ Definitely spikes if the feet comes predrilled for them.
Otherwise do it like they do at restaurants, fold up a piece of paper under the short leg.
04-24-2013, 10:57 AM #12
Back to topic, yep from my experience over the past week with nbg98 and trying to make it grippier, I'm finding that slippery strings are more powerful because there's less energy lost in the intersections of the mains and crosses during the stretch/rebound cycle. The only downside of slipperiness is loss of directional control as the bird slides on the stringbed. I suppose this can be minimized by stringing slippery strings a tad tighter.
04-25-2013, 01:44 PM #13
sounds like there will need to be some experimentation done on this.
04-25-2013, 01:59 PM #14
^ I know you were looking for it a few days ago... have you found your wd40 yet?
04-25-2013, 02:15 PM #15
- 2 identical rackets (maybe my SW35?)
- 2 identical strings (ZM62? i got tons of those and they are grippy to start with.)
and then we can do experiments on them. both must be strung at the same tension.
then we can have A/B testing done by other people.
visor liked this post
04-25-2013, 09:17 PM #16
Been researching on tennis string slipperiness and lubrication. Seems like some research shows that extra spin is achieved with lubrication on both old notched stringbeds and new unnotched stringbeds. The theory is that less interstring friction allows the strings to snap back faster and more completely. This is also observed with naturally slippery polyester strings with low coefficients of friction.
Wonder how this would translate to badminton, obviously not in terms of spin, but in terms of power.
Another thing, better use silicone spray instead of wd40, as the latter leaves a sticky residue and has organic solvents that may deteriorate the string.
04-25-2013, 09:20 PM #17
I have a pair of identical spec xp70 strung with zm62, so I'll get some silicone spray tomorrow to try. Meanwhile I still need to roughen up the nbg98.