Results 18 to 29 of 29
Thread: stringing problems
05-31-2013, 04:04 PM #18
Grommets 14-15 in the bottom still should be fine I think, but try to position the top of the frame like in the photo, make sure there is still firm support under the frame, not just white protection plate. It will make side support at somewhere about grommets 13-14.
You can see also, there is leather protection between the top support rod and frame, I think it helps to prevent damage to the paint.
Last edited by stradrider; 05-31-2013 at 04:14 PM.
05-31-2013, 04:20 PM #19
Just checking :-), you are using side support's plates with sandpaper side down, right? :-)
Last edited by stradrider; 05-31-2013 at 04:25 PM.
05-31-2013, 05:01 PM #20
05-31-2013, 05:31 PM #21
i will post a pic where i adjusted the 6 & 12 o clock positions accordingly. and to stradrider i did put the sand paper side down
06-01-2013, 02:33 AM #22
Oh yes, :-) It was the light in one of the photos, that made it look like the sandpaper is up ...
By the way, if you count top 17th hole using 78 grommet pattern, than it's no problem, I think...
06-01-2013, 02:46 AM #23
i just finished string my at900p @22x24lb. the side supports was at b13 and a16 and it came out great. will post the pics soon. but i will have to put new sand paper on the side supports. they are already beginning to look smooth.
06-01-2013, 02:54 AM #24
Good to hear :-)
I used very rough paper, I think 80 or something. The best sandpaper is the kind designed for the machine, those are very durable.
06-01-2013, 06:15 AM #25
Use the used grips as cushion if you don't want to scratch it.
06-01-2013, 07:30 AM #26
06-01-2013, 09:56 AM #27
i'm using a grade 80 metal type sand paper. on the other hand ur saying to use the grips where? between the racquet and the supports ?
06-09-2013, 07:36 PM #28
stringing my at900p
06-10-2013, 06:27 AM #29
Looks ok, from what is possible to see from the photo... Just make sure side supports screwed thoroughly, and you should be ok...
The grip talk was about protection between the 6/12 o'clock posts and racket frame to avoid scratching the paint by the metal of the post.