Results 1 to 6 of 6
07-23-2013, 07:33 AM #1
Has anyone tried these base clamps? Are they any good?
Hi guys, I was wondering if any of you have tried these base clamps before and if so, are they any good? http://www.racquetdepot.co.uk/pros-p...se-and-bar-v2/
I need a replacement for the Eagnas stock ones on my machine (the same as the ones on the eagnas 810/910) as they constantly need readjusting, sometimes as many as 3/4 times during stringing! Of course this is far from ideal so I'm hoping I can get some advice here for replacements. Are there any others I should look at? I plan on buying the watdon dual clamps in the nearish future so ideally the replacement base clamps would be compatible with them.
07-23-2013, 11:14 AM #2
I still have the original clamp bases that came with the Pro's Pro stringing machine I purchased (those are spring assisted) but a friend of mine upgraded, I think in June, to the one's you are looking at (version 2) from clamp bases he had had for about 10 years. They have the same specifications but apparently the V2 has CNC parts which are more durable. Plus, they don't have to be tightened every so often with the Allen key! So, they look pretty good and decent.
I have these tennis clamps which are going strong. They are all 12mm and so the compatibility is fine with any of the Pro's Pro clamp bases. Eagnas and Pro's Pro seem to have very identical specifications.
07-23-2013, 04:15 PM #3
Yh, its the tightening with the allen key and tightening the washer type thing at the bottom so much that is driving me nutty so that sounds good. Hopefully I can get some more information about slippage, durability and the like as well. Thanks for the information.
07-24-2013, 06:36 AM #4
I spoke to the friend that has those V2 clamp bases earlier today and brought up the clamp bases as I've become quite interested in them myself!
The silver bar is now rougher, instead of smooth, to reduce slippage to just about zero. The clamps fit more snugly in the clamp base spigot too. You just keep turning the lever until it locks and you never need to tighten with an Allen Key.
Anyway, hope that helps.
TheNotoriousLIG liked this post
08-28-2013, 09:13 AM #5
08-28-2013, 09:36 AM #6
Last edited by TheNotoriousLIG; 08-28-2013 at 09:41 AM. Reason: Double post