Results 1 to 4 of 4
08-13-2013, 12:24 AM #1
How to reset VR1 & VR2. Anyone can help me please?
Can anyone help me how to reset the vr1 & vr2 in my eagnas combo 5060 auto stringing machine. The problem is the minimum tension that it can only pull by now is 28lbs. Below that cannot already. And also if 28lbs it is very slow both cross and main. Hope there's someone out there can help me with this problem. Please help me. Thank you
08-13-2013, 10:54 AM #2
I have no idea how to reset it or if it can be reset. But you can try to use a small screwdriver to adjust the potentiometer "VR1". Turn this potentiometer "VR1" counterclockwise To reduce the tension. Good luck.
08-14-2013, 11:41 PM #3
Thanks man,, I always do that for calibrating. And it works. But the problem is the minimum tension now that it can strung is 28lbs,,,below 28 cannot. And if 28tension the pulling is very sloww,,,hope there's someone out there help me fix this problem. Before even 20lbs can do and the pulling is fast. Now minimum 28lbs both cross and main please HELP
08-26-2013, 07:52 PM #4
anyone has an idea how to fixed my machine problem thanks guys