Has anyone tried using this http://www.mybadmintonstore.com/sho...ufacturers_id=26&products_id=909#.U9pXFPldV40 or sanding down the grip to make the grip smaller? I been trying to debating which one to do. Would changing or sanding down the wood change the balance of the racquet?
Yeah I did that when the handle on my BS11 broke. It's not difficult to replace but you do need a bit of patience. The hardest part is taking the cone off the original handle I picked away at the wood a little at time until there we no wood left in the cone. I wouldn't bother sanding down the handle myself as I wouldn't trust myself in doing it accurately enough. But if you feel you can, then by all means try that.