2 Knot Stringing Method

[Wonderland]

Does any one can post up 2 knot stringing method....like picture will be best

Thank you all~

[LazyBuddy]

Does any one can post up 2 knot stringing method....like picture will be best

Thank you all~

I believe there are several old threads discuss 2-knots and 4-knots string methods. I believe a link to some online tutorial was also included in those thread(s). Maybe a search 1st?

[Wonderland]

I did do some search in BF....hoping to find a nice picture instruction...but ended up have nothing><ll

I believe there are several old threads discuss 2-knots and 4-knots string methods. I believe a link to some online tutorial was also included in those thread(s). Maybe a search 1st?

[Neil Nicholls]

I did do some search in BF....hoping to find a nice picture instruction...but ended up have nothing><ll

Well, can you tell us what you already know.
Are you a stringer?
What sort of machine & clamps have you got.

[Wonderland]

Thx

I am using EAGNAS Smart 808 right now....I know how to do the 4 knot stringing method......I want to learn it because some sotx racket really don't support with the 4 knot stringing method...the last finish hole suppose to be 6th one..but it only can fit one string path...

Well, can you tell us what you already know.
Are you a stringer?
What sort of machine & clamps have you got.

[taneepak]

Thx

I am using EAGNAS Smart 808 right now....I know how to do the 4 knot stringing method......I want to learn it because some sotx racket really don't support with the 4 knot stringing method...the last finish hole suppose to be 6th one..but it only can fit one string path...

Use grommet 7T instead.

[Wonderland]

but 7T also only can fit one string path....so the basic way to solve this is 2 knot stringing....that is what i am thinking

Use grommet 7T instead.

[LazyBuddy]

the last finish hole suppose to be 6th one..but it only can fit one string path...

6th? You mean T6 (top) or B6 (bottom)? If B6, u should use B8 for main, and B7 for cross.

[Neil Nicholls]

that's the trouble with T
it might be from Top and Bottom
or from Head and Throat

[Neil Nicholls]

Does any one can post up 2 knot stringing method....like picture will be best

Thank you all~

You use 1 piece of string.
String the mains as normal except you don't have the same length of string on each side of the shaft.

On one side you will want enough string to string half the mains and then tie off as you normally would tie off that main. This is called the "Short Side".

On the other side you need enough string to string half the mains and all the crosses. When you finish the last main on this side, you don't tie off, you feed the string into the bottom cross, and string the crosses up from the throat to the head.

[Wonderland]

let me say it more a bit...I was doing 4 knot on 2004 sotx 4A....
I finsih with the main and have knots on both B8....that are find
But after i finish the last cross....which is B9? and try to make the knot on B6...but.....the hole is not big enough to take string...so does B7........So I was forcing to make the knot on B9 -_-ll....which is one cross less then the normal racket

6th? You mean T6 (top) or B6 (bottom)? If B6, u should use B8 for main, and B7 for cross.

[LazyBuddy]

let me say it more a bit...I was doing 4 knot on 2004 sotx 4A....
I finsih with the main and have knots on both B8....that are find
But after i finish the last cross....which is B9? and try to make the knot on B6...but.....the hole is not big enough to take string...so does B7........So I was forcing to make the knot on B9 -_-ll....which is one cross less then the normal racket

What string u using? If u use anything like BG65 or thinner, u should have no problem for B7, and I strung Woven 4A before. You might need to use the owl to "loose" the gromment a bit, before let the 2nd string going through.

Or, an alternative solution, is also tie the cross on B8, which make 1 B8 has 3 strings instead of 2. You also need to use the owl to "loose" the gromment a bit before using the extra piece.

[Wonderland]

Actually i try to use owl to loose it a bit..but the string will just simply....break><ll

What string u using? If u use anything like BG65 or thinner, u should have no problem for B7, and I strung Woven 4A before. You might need to use the owl to "loose" the gromment a bit, before let the 2nd string going through.

Or, an alternative solution, is also tie the cross on B8, which make 1 B8 has 3 strings instead of 2. You also need to use the owl to "loose" the gromment a bit before using the extra piece.

[taneepak]

Actually i try to use owl to loose it a bit..but the string will just simply....break><ll

If you can get hold of a similar but unstrung racquet, try to insert two strings into 6T or 7T (T stands for throat) and see if they pass through. I am curious as to why there are racquets that are specifically made for 2-knot stringing.

[cooler]

on the AT800's, the 6T & 8T holes allow dual entry, not the 7th

[LazyBuddy]

Actually i try to use owl to loose it a bit..but the string will just simply....break><ll

Try use the piler to "guide" teh string through.

[taneepak]

If you can get two strings into the bottom grommet 7 on a blank racquet, but at the same time find it impossible to tie off the knot at grommet 7 at the bottom without breaking the string when you are stringing, then your other alternative is to pre-weave the string on the racquet.