Results 222 to 238 of 556
Thread: Dinker Dan's Over Grip Review
01-18-2007, 06:13 PM #222Originally Posted by DinkAlot
they carried other color but not Wilson X-Tra Tack.
maybe shop cross the border to Malaysia or Indonesia to find Grey and Yellow one.
02-02-2007, 10:58 PM #223Originally Posted by DinkAlot
I don't know why many pro use thin overgrip?? feels not quite good in my hand.
02-02-2007, 11:28 PM #224Originally Posted by sifuyono
I never just use one single overgrip under the handle. At the least, I have one overgrip under it to provide cushioning (meaning two overgrips on the handle). I mix and match to get my desired thickness, cushioning and tackiness.
Currently, the best set-up I have encountered is the SOTX D-600 with a 3-3/8" grip with Yellow Wilson X-Tra Tack overgrip to make it a 3-5/8" grip. My process:
1) Remove the original, very cushioning, leather SOTX grip.
2) Smooth down the handle edges a little with the dull side of a pair of scissors.
3) Replace the original SOTX grip.
4) Tape the very edge of the SOTX grip with finishing tape. This is to be able to remove the overgrip easily with out damaging the SOTX grip.
5) Apply the Wilson X-Tra Tack overgrip. I overlap in the middle to create an essentially smooth surface.
02-04-2007, 08:00 PM #225Originally Posted by DinkAlot
02-04-2007, 09:15 PM #226Originally Posted by DinkAlot
02-04-2007, 11:13 PM #227Originally Posted by sifuyono
Based on that, I modify accordingly.
Usually with a Yonex G4, I just need to add one overgrip onto the existing grip.
If it's a Yonex G3, I would remove original overgrip and use two overgrips.
If it's a Yonex G5, I would remove the original grip and add a thicker replacement grip such as the Karakal PU and then another overgrip.
In a perfect world, I would have the cushioning feel of the Karakal PU under a Wilson X-Tra Tack Gray or Yellow at 3-3/4" in circumference.
Last edited by DinkAlot; 02-04-2007 at 11:18 PM.
02-05-2007, 02:18 AM #228Originally Posted by DinkAlot
mine g-4 add 1 wilson pro overgrip, still feel hard, maybe need to add 1 overgrip again
02-05-2007, 02:36 AM #229Originally Posted by sifuyono
02-05-2007, 08:10 PM #230Originally Posted by DinkAlot
02-05-2007, 08:44 PM #231Originally Posted by sifuyono
Sure you can but I would add some protective tape over the original grip otherwise you will damage the original grip when it comes time to remove the KPU (Karakal PU) grip.
02-06-2007, 01:28 AM #232Originally Posted by DinkAlot
btw, what kind of protective tape that u mean? a thin overgrip or something?
Last edited by sifuyono; 02-06-2007 at 01:33 AM.
02-06-2007, 01:39 AM #233Originally Posted by sifuyono
02-06-2007, 03:43 AM #234Originally Posted by DinkAlot
one again thanks for the advice
02-12-2007, 08:31 PM #235
dink, i would like to ask, i wonder between wilson x-tra tack and wilson pro, which one is thicker? i never try x-tra tack yet
btw, is ur review about replacement grip have done yet? i'm excited to see the result
i already put fruit's plastic wrap for taping the grip below Karakal PU hehe... Just don't try it yet, hopely between original grip and the plastic not slip
02-12-2007, 08:36 PM #236Originally Posted by sifuyono
02-13-2007, 02:19 AM #237
what do i do when the original/factory grip (leather grip?) came off while taking off a grip? meaning now i can see the whole wood of my handle. so do i just put a replacement grip on?
02-13-2007, 02:58 AM #238Originally Posted by llpjlau
By Lindanftw in forum GripReplies: 2: 02-20-2011, 06:31 AM
By gavinloh in forum GripReplies: 1: 01-06-2011, 04:59 PM
By cycilver in forum Badminton Rackets / EquipmentReplies: 18: 12-06-2010, 08:34 AM
By yoyomonkey in forum General ForumReplies: 4: 08-31-2006, 01:07 PM