Thread: how to reduce vibration?
03-02-2006, 12:07 AM #35
Originally Posted by Pball
string might be dead... i mean repulsion is lost
03-02-2006, 07:57 AM #36
Originally Posted by taneepak
Arent the virbration comes from bad hitting technique .. ?
Days ago ,i tried to hit flat drives with a light racket (4U) even balanced ,
i tried to wack it very hard, and i do not do much sweet spot clean hit... after the session ....experience some sore around eblow area, like tennis eblow .
well, bad / improper technique cause much virbrations ....y for the need of changing the personal prefrence.
The equipment is good, just the ugly technique ,need to polish ...
03-02-2006, 08:16 AM #37
badminton is a sport where u impact the bird with yr racket
vibration transfered down to your arm is guranteed. U can play with
softer racket shaft, lower tension if that feeling doesnt fit yr style.
But some ppl like that as it gives you the "FEEL"
Like a racing car with strong spring and dampers. strengthen yr car in corners
but u can expect a super bumpy ride as well. Speed freak love it as it gives you the FEEL for the road. I say give me a Mercedez cos i like my ride to be
quiet and comfie.
Depends on your needs, pick the racket that fit your style.
03-03-2006, 03:42 PM #38
Get yourself a NS6000 with LSC system and the bad vibrations are gone
03-03-2006, 03:50 PM #39
1. wear a thick glove
2. wrap on thick foam overgrip(s)
03-03-2006, 03:52 PM #40
Originally Posted by silentheart
it's amazing how a small innocent rubber band can cut down the vibrations
03-10-2006, 12:36 AM #41
remember the scotch tape that creates noise? i found those reduced vibes too when we were fooling around with those.
03-11-2006, 04:19 AM #42
Originally Posted by chickenpoodle
03-11-2006, 04:48 AM #43
Improving your stroke timing will reduce the vibration to manageable level. A relaxed poise not only gives the best control, but also the potential for unleasing the hardest shot. Only one way I know for consistency.
03-11-2006, 04:54 PM #44
Originally Posted by taneepak
03-11-2006, 05:09 PM #45
Originally Posted by quik_silver
head protector advertised to even help tennis elbow too
03-12-2006, 02:30 AM #46
Originally Posted by other
center 4 or 6 mains, one to two strings from the bottom.
there was a thread about how taping the strings created a really loud snappy sound upon striking the shuttle. its really cool. but i noticed it was also reducing vibration. its fun to try out.
10-17-2010, 12:28 AM #47
I'm using an Arc10 strung with NBG 95s at 23x25, and I am still feeling far too much vibration for my liking... mind you I am using the original yonex grip that came with the racket... Any other ideas to reduce vibration?
My old racket; Fleet Tank power 100 offensive, I usually strung with 23x25 BG65 with a fleet grip, had practically no vibration at all.
10-17-2010, 12:36 AM #48
10-17-2010, 12:51 AM #49
10-17-2010, 01:04 AM #50
Super graps would be a good start.
10-17-2010, 01:11 AM #51
This might sound ridiculous, but this is what I tried two years ago on a 3U AT700.
I put plasticine (modelling clay) inside the hollow part of the handle. (It made the racquet bottom-heavier of course)
The plasticine worked as a damper to reduce the vibration coming from nbg95 at 28lbs (too high for me back then), and the added weight made the shots feel more powerful and solid. I don't do that anymore though, because the TC700's handle isn't hollow
By yankiat in forum Chit-ChatReplies: 5: 06-27-2010, 05:51 AM
By muralintr in forum Badminton Rackets / EquipmentReplies: 15: 05-01-2010, 03:48 PM
By stanley85 in forum GripReplies: 20: 04-23-2009, 08:35 PM
By shot3gun in forum Badminton Rackets / EquipmentReplies: 4: 02-12-2009, 08:56 PM
By MarcRafles in forum Badminton StringReplies: 27: 08-14-2006, 12:53 PM