Start stringing

**hong** · 07-28-2006, 10:05 AM

I would like to know if there are any pictures or video that shows the way to start stringing ?

the videos posted previous don't work.

What I understand is that you start from the middle (mains) then u do one half according to the stringing pattern of the racquet (while fixing the loose end with clamps and then you do the other side of the racquet?

Thanks

**silentheart** · 07-28-2006, 11:29 AM

PM me your email address and I will send you scans of Klippermate's starting method tonight. I would suggest you to string alt each side. If you string one side 1st, you might cause frame to warp if racquet is not secured properly.

**LazyBuddy** · 07-28-2006, 01:22 PM

Originally Posted by silentheart

PM me your email address and I will send you scans of Klippermate's starting method tonight. I would suggest you to string alt each side. If you string one side 1st, you might cause frame to warp if racquet is not secured properly.

I am 2nd to this. Make sure alt. between 2 sides, with every 2-4 strings tensioned, based on the tension u work on. Never finish 1 side completely, then go to the other. Very risky for the racket, and poor job quality.

Same thing applied to cross, if you start in the middle.