Results 1 to 2 of 2
09-08-2006, 11:13 AM #1
GUys i need some help on my newly bought stringing machine....
I just came back from china and i bought a new eagnas flex 920 stringing machine (a machine very similar to dink alot). However, I am having A TON of trouble learning to use the clam becuase im not use to using the swivel clamp and the clamp keeps sagging down after i release the weights. Whats the problem? am i clamping wrong? or do i need to add springs to the clamps like dink alot did? Thanks for taking the time to help you guys and i would appreciate immediate reponses ASAP! thanks AGAIN!
09-08-2006, 12:21 PM #2
You're referring to tensioning the first main? If so, what I do is to just hold up the clamp level with the stringbed as I tension the string. I've an electronic head, so that also makes it slightly easier; but, I've done it with a crank, too, with no issue.
Other than that time at the beginning, the clamps shouldn't sag because the tension of the stringbed.
By shaizam in forum Buy & Sell - Read the rules sticky before you postReplies: 6: 11-03-2011, 05:07 AM
By conorha in forum Badminton Stringing Techniques & ToolsReplies: 9: 01-29-2011, 12:20 AM
By stevcool in forum Racket Recommendation / ComparisonReplies: 14: 01-21-2010, 11:44 PM
By stogguul in forum Canada EastReplies: 1: 10-22-2008, 07:34 PM
By jsunsun in forum Badminton Stringing Techniques & ToolsReplies: 3: 11-02-2006, 10:27 AM