Dear Friends, I'm an all round player who wants to advanced and increased my smash power, currently I'm using Original (Made in Taiwan) MP23 2U/G4 strung with BG66 30lbs (about 23lbs Yonex standard), I am quite satisfied with it even though for smashing I've tried my friend's MP66 3U/G4 was better in speed As I want to extend my power, I bought AT300 4UG4 for about US$ 90 (serial no. .....SP/Singapore .. maybe) standard stringing up to 24lbs as it is written on the cap (Yonex standard) but during the stringing process on 29th lbs (22lbs Yonex) less than the MP, the head frame cracked!!! But the store keeper comely said "don't worry, Yonex will replace it with the brand new one as part of their quality warranty". That wonders me, whether the crack was due to the one bad item/product or it is a general weakness of 4U racket. Hope y'all wouldn't mind advising me if most of/general 4U racket are subject to crack risk, or it is just one item/casuistic problem, because it was strung on about 22lbs by not exceeding the it's maximum standard tension which is 24lbs. Btw, the second question is, is it so far to compare between AT300 and AT500 as I tried my neighbor's AT500, it was too stiff and felt a little bit awkward due to I'm used to MP feels. When I tried to swing AT300 for several times, feels like I might get used to it easily maybe due to its medium flexibility Thanks in advance for any reply ps: I'm sorry that I'm opening new thread since I found very less intensive/deep review on AT300 in several previous threads, and I'm quite aware that for smash power 4U is less than 3U as written on previous threads, but I like the lightness of 4U
...waahh?? if it was strung at 22 lbs then your alright, but if it was strung higher then recommended then your pretty much screwed. it should'nt have broke @ 22lbs only, anything below reccomended tension is safe, so it could've been manufacturing fault, or stringers fault.
Thanks LAM! It's lightning fast reply indeed! The store promised to replace it within a week hopefully it'll be ok, but is 4U subject to crack risk due to its lightness?
if you string above 25-26lbs then yeah, its safe to string 1 - 2 lbs above reccomended since even if it does break yonex will allow it since the machine may be calibrated slightly off. but yeah 4u is more fragile then racquets that are more dense. also depends if its head heavy or head light.
I was stringing my racket with non-Yonex machine which its tension springs might have deteriorated, so for the same tension (let's say) 30lbs by this machine, on Yonex stringing machine which has more durable condition, the tension might be 23lbs. Just use your math to convert if I used 29lbs by this machine, on Yonex stringing machine it should be around 22lbs So that's why I was surprised. On the cap it was written max 24lbs (I assume by Yonex stringing machine), so by machine that my store used it should be 31-32lbs, instead, it cracked on 29lbs Hope you get the idea ...
That's why I was shocked since I thought between MP, AT and NS I guess AT has the most durable frame mb it was just like as Lam said ... manufacture fault, since, when the stringer was aware that the frame wouldn't go for 23lbs he lowered/reduce the tension to 22lbs .. still his effort didn't help
u r lucky u get a warranty replacement from yonex. sound like u got an issue with your machine. Some stringers are using electronic gauges to 0.1 lb, and 0.5lb for mechanical but u r guessing your like +/- 7 lbs.
Lub and calibrate your machine first before you string a racquet if you are not sure. I am sorry to hear your lost and good luck on on getting another racquet.
Mind the feels not the trend and price I got my racket yesterday AT300 4UG4 slightly head heavy and medium stiff and strung with BG66 at 23lbs, it is extraordinary awesome!!!!! At first I was a little bit concern due to the low popularity and less review But it's all gone after I played it last night If I didn't hit it carefully and push all my power as I used my MP23 the shuttle will bounce here and there out of the court caused by the amazing repulsion!!! Although I have to admit the 4U may not have the "full thunder" for smashing, but for clears and lobs it was great and for smash was much faster than my MP23 (maybe bcoz I was using MP23 not higher kkkkkkk) Overall great racket ....... I'm so pleased that I didn't buy AT500 ps: the color is much more beautiful than the picture
MP23 tension is 22.5lbs, with that I need to push much more power to smash and clear With AT300 (23lbs/only slightly different with MP) the speed of the shuttle is much faster so if I'm not careful and hit by AT as I hit by MP the shuttle will go further than I think of
My friend cracked his at300 4u while stringing at 25lbs. Actually he bought it from me and had been using it for less than a month. I only used the racquet about two months. This is the first time I saw the stringer cracking any racquet. Before that I never heard he crack any racquet even the low end ones. At300 4u must be a really fragile racquet. Glad I changed to at500.