APACS fan club

**samlim89** · 11-05-2011, 07:06 AM

i am using slayer 220 any comment ?

**yosi11** · 11-06-2011, 01:01 AM

just tested my new Apacs Nano 900 Power with Li Ning ap 62 26/27 lbs as the string It's a very good racket for smashing the balance point with the grip and the string is about 29.5-30. It's easy to do a drive with this racket, Both offense and defense was pretty good

**shahkiz** · 11-12-2011, 03:59 AM

Anyone using lethal 8?I really like that racket...

**yosi11** · 11-12-2011, 08:03 AM

Anyone has a review of apacs finapi 77/88

**Timz :]** · 11-12-2011, 05:19 PM

Originally Posted by yosi11

Anyone has a review of apacs finapi 77/88

Well I have the finapi 80, which is similar i think. It's an overall lightweight racket. It's also really slim. It takes some getting used to since you can't rely on the head weight to do a full swing for a smash. It's also quite stiff.

**Distanc3** · 11-13-2011, 04:29 PM

hi all,

I would like to vouch for the quality control of Apacs.

I recently acquired 5 tantrum 300 the specs are as follows:

x1 89 grams 290mm
x3 90 grams 290/290/289mm
x1 91 grams 290mm

The measurements are made without strings, factory grip along with plastic.

Now its time for testing.

**LD rules!** · 11-13-2011, 05:48 PM

Originally Posted by Distanc3

hi all,

I would like to vouch for the quality control of Apacs.

I recently acquired 5 tantrum 300 the specs are as follows:

x1 89 grams 290mm
x3 90 grams 290/290/289mm
x1 91 grams 290mm

The measurements are made without strings, factory grip along with plastic.

Now its time for testing.

you acquired via Apacs Canada ? Or another source ?

do you mind if i ask how much ?

**wuzent** · 11-13-2011, 09:19 PM

Originally Posted by Distanc3

hi all,

I would like to vouch for the quality control of Apacs.

I recently acquired 5 tantrum 300 the specs are as follows:

x1 89 grams 290mm
x3 90 grams 290/290/289mm
x1 91 grams 290mm

The measurements are made without strings, factory grip along with plastic.

Now its time for testing.

still acceptable...

**Distanc3** · 11-13-2011, 09:21 PM

I would say its very consistent

**vinzend** · 11-13-2011, 09:52 PM

Hi all, I have Apacs Tantrum 300, strung @24lbs BG80.
It's very hard to bring powerful smashes. I thought it was just me lacking power, but I tried my friend's Victor BS10, it was definitely more powerful. He also tried mine and he didn't like it.

I want to give some efforts first to make it better before deciding to sell it. anything I can do?
like changing the string or putting tape at the head?

**ventisg** · 11-14-2011, 08:09 AM

Hi Guys,

Pls help me choose between Edgesaber 10(3U) and lethal 7(4U). Still cracking my head on which one to buy.
Thanks alot =)

**zero_hour** · 11-14-2011, 09:50 AM

Originally Posted by vinzend

Hi all, I have Apacs Tantrum 300, strung @24lbs BG80.
It's very hard to bring powerful smashes. I thought it was just me lacking power, but I tried my friend's Victor BS10, it was definitely more powerful. He also tried mine and he didn't like it.

I want to give some efforts first to make it better before deciding to sell it. anything I can do?
like changing the string or putting tape at the head?

24lbs hmmm,try change to Yonex BG66/ultimax or Victor VS650 or Ashaway Zymax 62,...just my 2cent,

**vinzend** · 11-14-2011, 11:01 AM

Originally Posted by zero_hour

24lbs hmmm,try change to Yonex BG66/ultimax or Victor VS650 or Ashaway Zymax 62,...just my 2cent,

should I also increase the tension?

**wuzent** · 11-14-2011, 12:45 PM

Originally Posted by vinzend

Hi all, I have Apacs Tantrum 300, strung @24lbs BG80.
It's very hard to bring powerful smashes. I thought it was just me lacking power, but I tried my friend's Victor BS10, it was definitely more powerful. He also tried mine and he didn't like it.

I want to give some efforts first to make it better before deciding to sell it. anything I can do?
like changing the string or putting tape at the head?

changing the string might be the 1st, because the bg80 is a hard hitting string. It will hard to generate powerful smash if u don't have a powerful arm.

compare the spec of bs10 and t300, bs10 is head heavy and t300 is just slightly head heavy.
So u can try to make the grip smaller a bit by taking off the original grip. If u have done so, then u just go ahead for the lead tape.

**irwan_kho** · 11-14-2011, 05:32 PM

don't get Edgesaber 10 because it's too light and no power. you are better getting the Lethal 9.

Originally Posted by ventisg

Hi Guys,

Pls help me choose between Edgesaber 10(3U) and lethal 7(4U). Still cracking my head on which one to buy.
Thanks alot =)

**irwan_kho** · 11-14-2011, 05:43 PM

correct, need to change the string because BG80 is too tight and stiff.

Originally Posted by wuzent

changing the string might be the 1st, because the bg80 is a hard hitting string. It will hard to generate powerful smash if u don't have a powerful arm.

compare the spec of bs10 and t300, bs10 is head heavy and t300 is just slightly head heavy.
So u can try to make the grip smaller a bit by taking off the original grip. If u have done so, then u just go ahead for the lead tape.

**vinzend** · 11-14-2011, 10:33 PM

thanks for the responds guys. actually i had been gripping it wrong that's why i couldn't smash properly.
so new

my friend said i hit harder than him but i was doing it wrong. so after he taught me how to do it right, it felt so much nicer. i'm starting to like it after today.

good thing I didn't sell it. was gonna but the guy didn't show up

well imma redo the grip to make it look and feel nicer