Results 1 to 9 of 9
Thread: Max tension??
05-13-2007, 04:39 PM #1
On my racket it says tension 17-20lbs. I was wondering if the tension can go to higher tensions lets say 22-23lbs. Would it be ok or would the frame snap????
05-13-2007, 05:23 PM #2
what racquet is it?
most racquets should be able to take much higher tensions than what's recommended, most of us certainly do string them that way.
05-13-2007, 05:28 PM #3
It probably can.
Manufacturers often list tension limits that are far lower than the real limit for the racket.
The real limit depends on the racket, but I would be astonished if a racket could not handle 23 lbs safely.
Most top quality rackets should be able to handle 30 lbs or more, but they will be more vulnerable to stress from mishits or clashes. Higher tension inevitably increases the risk of frame breakage.
05-13-2007, 05:40 PM #4
the racket is a black knight impulse 727.
05-13-2007, 07:53 PM #5
Yes, don't worry, it can. Just make sure to get your racket(s) strung by a competent stringer.
05-13-2007, 09:23 PM #6
friend of mine string a Tactic racket, and it broke @ 22lb
I am stunned when i hearn the news
05-14-2007, 02:32 AM #7
I string my Tactic rackets between 26-30lbs...depending on which model it is. So I think he was either unlucky or maybe the stringjob wasnt done correctly
05-14-2007, 04:11 AM #8Originally Posted by IvanM
05-14-2007, 07:41 AM #9Originally Posted by IvanM
1. Stringer's fault
2. String machine needs calibration (part of stringer's fault)
3. Racket has manufacture defects
4. Racket in poor condtion (i.e. suffers bad string job, clashes before, etc)
By dawei94 in forum Badminton Stringing Techniques & ToolsReplies: 20: 11-14-2009, 12:35 AM
By Gold- in forum Racket Recommendation / ComparisonReplies: 1: 09-26-2009, 02:55 AM
By Tekkai in forum Badminton StringReplies: 5: 06-16-2008, 05:46 AM
By jsunsun in forum Badminton Stringing Techniques & ToolsReplies: 33: 10-29-2006, 02:25 AM