Klipper M140 Stringing Instruction

**The Godfather** · 03-17-2010, 04:53 AM

i'l put up a video of the last main strings and tie off with two pros pro clamps

**The Godfather** · 03-17-2010, 08:07 AM

here you go
http://www.youtube.com/watch?v=ncZ_xrsHEwc
sorry for the bad quality

**illusionistpro** · 03-17-2010, 12:03 PM

fandulan, look at the image here: http://www.badmintoncentral.com/foru...3&postcount=20 your string pattern should be the same as this. Im a little confused by your directions "Start from top centre, keep on stringing until B9 ( skip A8 & A10 ). Go through B12, directly to A15 , and then straight to A13, down to B10 and tie off at B8."

It should be, string from the middle until b9, go up through b12-a11, down a10-b10. The only hole you should be skipping is b11. If you do that, you can then tie @b8 as in the picture. Take a moment to study it.

If you are only using fly clamps, then you will not be pulling the outside most mains (11th). You will be doing a "double pull," which is pulling 2 strings at one time. You pull the 9th main, clamp, then you pull both the 10th and 11th at the same time downward. You can use your clamps from under the racket to give yourself some room on top when you do your tie off.

**Distanc3** · 03-17-2010, 12:16 PM

Fandulan, take a look at the stringing instructions for these specific rackets.
http://www.yonex.com/badminton/strin...ons/index.html

this should guide you which grommet to string/tension through as you did not mention the specific racket you're stringing. Btw it wont hurt to add 1-2lbs on the last main as you'll be tying off the knot and tension lost will occur

**fandulan** · 03-17-2010, 02:23 PM

by the way i am stringing my new yonex ns9900. but since i got my klipper i cut the strings to experiment with my first experience. and unfortunately, its still not string. but i am hoping that thru your help guys i can successfully restring it.

**singnflip4life** · 03-17-2010, 02:24 PM

O.O fandulan, could you maybe buy a cheap steel or aluminum racket to practice with first? I'd hate for the NS9900 to accidentally break when you string it.

**fandulan** · 03-17-2010, 02:54 PM

but better to first do in the most expensive racket so i will be very careful doing it. ill do it for sure if you will give me a good start to begin with. really i am very serious in learning it..

**The Godfather** · 03-29-2010, 10:17 AM

hey man, I am going to post a few videos in a few days on how to string a badminton racket on a crack machine but you will be able to apply the method to your klipper M140 machine.

**fandulan** · 03-30-2010, 01:20 AM

thanks godfather ill wait for your next post. anyway my hiqua clamps in on its way. it is really a big help.

**The Godfather** · 03-30-2010, 04:31 AM

Should be able to put them up tomorrow if more string arrives but otherwise it will be next Tuesday because i will gone to the uk.

**krisss** · 03-30-2010, 10:31 AM

Godfather , looking forward to your video!

**The Godfather** · 03-31-2010, 05:41 AM

sorry everyone no string came from stringersworld.co.uk this morning so it will come tomorrow morning but I am going to the UK at 10;30 so I'l try my best but it will be next week most likely.