Results 35 to 49 of 49
01-05-2008, 11:59 AM #35
Hehe... May you be reminded that the top end Yonex'es are made in Asia (Japan)
But western top ends branded rackets like sotx,wilson,babolat..even though they're quite new in badminton industry,some of their high ends rackets costs as much as the yonex high end as well.I have even seen a sotx woven racket that is 300 rmb more expensive than the AT900 or NS9000,the most expensive yonex rackets.
Well..i believe that's because yonex is the best brand in badminton industry,starting from when badminton popularity just reach its young age.Maybe from the 60s?Till today,almost everyone that play badminton,will at least know about yonex racket,or have one.That's why they're so expensive.
Older ppl,like my dad,all they know about a good racket brand is yonex.That's why i said before..yonex is almost as popular as the badminton sport,like "everlast" in boxing.What can i say..having a yonex let some of us felt closer to badminton.
01-07-2008, 02:18 PM #36
I tried a fake AT-500. It broke within ten minutes and was terrible.
01-10-2008, 10:56 AM #37
01-10-2008, 02:32 PM #38
Yes, there are good fakes and bad fakes. Depends on who makes them. I know for a fact that there are some copies out there that are exact duplicates of YONEX rackets. Not only do they look the same, but are made using the same technology (t-joint and material). These are a little more expensive than the cheapo fake ones where they just painted it and slapped on a YONEX sticker.
Last edited by AZbadman; 01-10-2008 at 02:35 PM. Reason: to add more text
01-10-2008, 02:59 PM #39
01-11-2008, 04:16 AM #40
01-11-2008, 04:50 AM #41
01-11-2008, 05:12 AM #42
01-11-2008, 05:41 AM #43
True...that was what the people who sold to me said. He said his racket are exactly like the genuine racket and can hold high tension. Since I was always curious about the fakes, I just buy 3 different models and see if what he said is true. It really surprised me. I know there is LOW QUALITY FAKES & BETTER QUALITY FAKES.
Probably what I got must be the BETTER QUALITY FAKES. Lucky me..because I expect those rackets to crack or break with that high tension.
At least now, I have 3 more rackets in my collections.
02-08-2008, 12:41 PM #44
I bought a fake NS9K but when it arrived the head was warped... so i never really got to give it a go... think if i cut the strings and get it restrung then i could use it?
thinking about getting another racquet something i can smash more in when compared to my NS8K but thats a different topic...
02-11-2008, 03:20 AM #45
I had a fake mp100 that looked pretty real at the time I bought it. It played horribly with bad accuracy, heavy vibrations, and it seemd to absorb any power you tried to put into your shots due to random flex. Don't buy fakes!
02-11-2008, 07:26 AM #46
I have totally left Yonex behind now after playing on Apacs rackets for 2years,.. I've Not come across a Yonex racket I prefer more than a genuine Apacs copy
I've been Delighted with the Apacs brand,.. There's lots of talk of companies missing off screws that attach the handle to the shaft,.. I have found these screws in every Apacs racket I have used, the build quality appears to be just as good and the Feel and response of the rackets i use I just seem to prefer.
A couple of months ago, I was playing on my favorite match racket (apacs nanospeed 9000) along side my doubles partner who plays on a Yonex Nanospeed 7000,.. We clashed rackets and his racket simply exploded into 3 pieces, My 'Fake' racket came off with a single crack,.. and i even managed to finish off the match with it.
I'm not about to turn this into another bloody Apacs appreciation thread however lol,... I think the only argument you can realistically claim is that there are indeed good fakes and bad fakes,.. search around a bit and be careful what you buy and you'll find a racket you like and you wont have to shed out loads of money for it either.
I can understand why people would perhaps feel safer buying a major company branded racket like Yonex or Carlton,.. But this is how i feel about Apacs,.. it's all about what you're used to and what your opinions are and how well they have been researched before being formed.
Hope my ramblings make at least a limited amount of sense lol
02-11-2008, 12:58 PM #47
There's 1 thing you are confused with: the "clones" (i.e. Apacs, Winex, Finnex, Yelnox, Fleet, etc) are NOT fakes.
The definition of fake is, the racket is poorly made without Yonex's authroization, but with an identical or close color scheme as the real one, and sold under "Yonex" lable.
I have no problem using (and I did use a few) decent made "clonex" brands, as long as they are from reputable manufactures with decent performance. However, I do have a problem to see ppl promote fakes, as it's simply against the law.
02-11-2008, 01:06 PM #48
no confusion,... the reason i call my rackets fake, is becuase My Apacs nanospeed 9000 has the same serial number on it as my mates Yonex Nanospeed 9000 at the club i play
unless he has a fake yonex. lol... it's all too complicated, in any case,.. I stand by my apacs any day over yonex rackets
02-11-2008, 01:15 PM #49
By Noobsmash in forum Identify Fake Racket (Price/Source/Serial/Photos are required)Replies: 32: 02-28-2010, 07:18 AM
By mater in forum Racket Recommendation / ComparisonReplies: 0: 09-27-2009, 09:43 PM
By Zhang Ning in forum Identify Fake Racket (Price/Source/Serial/Photos are required)Replies: 2: 04-29-2005, 10:29 AM
By MYSRH in forum Badminton Rackets / EquipmentReplies: 2: 12-08-2001, 11:06 PM
By MYSRH in forum Badminton Rackets / EquipmentReplies: 0: 12-08-2001, 03:27 PM