User Tag List
Results 18 to 34 of 57
-
06-11-2008, 05:26 PM #18
Yeah I got these on my shoes too, SHB99M but I've been using these for a year now... planning to get new ones soon

sorry for low quality, picture taken with my phone
-
06-11-2008, 07:43 PM #19
my SHB 99s died in 6 months, the area was becoming really fuzzy, so i got a pair to replace them
looks like im off to get some medical tape, or worse comes to worse sew a patch of leather on there
-
06-12-2008, 04:35 PM #20
w
i am 100% sure about this. just when you are about to lunge you have to rotate your hips so you are squarely faced to the shuttle.
some of you may say that pros dont follow this technique, but watch closely. it's not the side of the foot that's dragging, it is the (side) of the toe. (LD is an exception to this, he does both ways
)
-
03-15-2009, 09:05 PM #21
Weird Hole?
My SHB 90MX are quite old now but is it weird to have a hole on the side of the racket foot? on the outside... Has anyone had this problem before?
BTW Its on the racket foot, I did this to show where the hole is.
-
03-21-2009, 03:44 PM #22
-
09-24-2009, 01:17 PM #23
The small hole on the inner side of the non-racket foot, near the ball of the large toe, is a sign of proper foot technique when braking during a lunge.
The holes (or even tears) that develop on the outer side of the shoes (can be either foot) are a sign of the fabric beginning to wear down from use. These tears can also develop along seams. These tears occur near the bend that forms from the toe. To see the stress on the shoe caused by the toes bending, you can place your foot flat on the ground, then raise the heel such that the toes (all the way up to the ball of the toes) remain flush with the ground. You should notice that there are crease marks in the shoe or bends.
-
11-14-2012, 06:14 PM #24
As you can see I suffer from the same bad habit as well and these shoes are around 6 months old. Aside from obvious hole, the integrity of the shoe is still intact though. My right shoe still looks brand new. I really don't want to buy a new pair of shoes just yet. Is there anything you guys can suggest I use in the future to prevent this from happening again? I'm too old now to change my footwork now. I've used duct tape before but found it ineffective.
-
11-15-2012, 04:24 AM #25
I think professional players would have the same "problem" but we will never know because they change their shoes every 2 weeks or something like that ^^
I have my new Yonex SHB-86 since 3 months and I already have a small hole on the left non-racket shoe. The hole is not complete "through" yet, but it already doesn't look that nice.
I tried it with the yonex grip sticker(to hold the grip on the cone) over the hole, but after one game it was already gone. Best tape would be hockey tape as I guess!
Any other solutions for this "problem"?
-
11-15-2012, 07:32 AM #26
I've got some yonex shoes now and found I was wearing a hole in them pretty quickly. Before each session I stick some duct tape there with a folded square of paper underneath where the hole was forming, by the end of each night the duct tape is worn down but the shoe is fine.
-
11-15-2012, 07:49 AM #27
I find it difficult not to get a hole there... But I think it's nice to have one actually. Feels like a "battle scar" of sorts :P
These are my SHB-81W. I'm not using them anymore, but I only used them for like 7 months.
-
11-15-2012, 08:15 AM #28
-
11-15-2012, 08:18 AM #29
-
11-15-2012, 08:18 AM #30
*Edit
For some reason I managed to double-post. Can't seem to find the "delete post" button anywhere...?
-
11-15-2012, 08:32 AM #31
-
11-15-2012, 08:36 AM #32
-
speedyJT liked this post
-
11-19-2012, 08:30 AM #33
-
11-26-2012, 08:50 AM #34
There are three stages generally to a badminton players footwork; the first is where he knows nothing and it is really easy if he plays often to twist his ankle in the wrong way or damage his hips, rip his hamstrings etc. There is no obvious damage to his shoes so he feels okay. Once the footwork becomes more professional, we tend to use our non-dominant foot to scrape along the ground, and this is where we get the distinctive hole. Professionals have this issue corrected because they learn to slide with their non-dominant foot rotated a little more so the rubber section closest to the sole of the shoe (the corner of the shoe so to speak) is sliding on the ground. Have you ever noticed on most Yonex models the rubber extends upwards on the inside of both soles? That's because that's where professionals put their weight during their movements. Why isn't it so easy for most players to correct? because putting your weight on a smaller, more narrow section means a better sense of balance which the body isn't use to. So conclusion : You could patch up the 100+ shoes for a while, or you could learn to do the motion correctly, and save for the rest of your life
Similar Threads
-
Yonex Shoe got a hole!
By Cole Turner in forum Clothing & FootwearReplies: 17: 12-10-2011, 01:02 PM -
tensioner, left side or right side?
By kwun in forum Badminton Stringing Techniques & ToolsReplies: 23: 09-29-2011, 05:33 PM -
Hole in shoe in 1month
By GoDLee in forum Clothing & FootwearReplies: 2: 07-30-2010, 04:44 AM -
Hole on shoe?
By shawntn in forum Clothing & FootwearReplies: 56: 02-04-2006, 12:25 AM -
Hole on shoe?
By shawntn in forum General ForumReplies: 2: 04-13-2004, 06:20 AM




Reply With Quote


Bookmarks