Eagnas Combo 912

Discussion in 'Badminton Stringing Techniques & Tools' started by maa2003, Nov 10, 2008.

  1. maa2003

    maa2003 Regular Member

    Joined:
    May 7, 2006
    Messages:
    1,449
    Likes Received:
    1
    Location:
    Jakarta, Indonesia
    Finally arrived just now in my office, going to assemble tonite.

    I purchased it last week (Wednesday), and they shipped using DHL.

    Purchase directly from factory instead of Maxline (Eagnas Online) due to cheap shipping cost (less than USD 170), similar shipping cost will need 60-90days if purchase via online (Maxline)

    [​IMG]
     
    #1 maa2003, Nov 10, 2008
  2. maa2003

    maa2003 Regular Member

    Joined:
    May 7, 2006
    Messages:
    1,449
    Likes Received:
    1
    Location:
    Jakarta, Indonesia
    I would like to thank many experts here who contributed their opinion as like Pete_LSD, taneepak, etc.

    I have broke 3 cheap racquets at similar position (high-noon-disease or 12 o'clock position), while it was only less than 23-24lbs.

    So after applied some experts' opinion, now I can string at 26x28lbs without any problems on cheap racquets.

    I did Eagnas calibrator with tennis string for calibration the crank.
     
    #2 maa2003, Nov 16, 2008
    Last edited: Nov 16, 2008
  3. Optiblue

    Optiblue Regular Member

    Joined:
    Jun 4, 2004
    Messages:
    703
    Likes Received:
    20
    Occupation:
    I just show up
    Location:
    Canada, BC, Burnaby
    good stuff :)

    Try Pete the Little Shoulder Devil's approved tension of 33x36.3lbs!!
     
    #3 Optiblue, Nov 17, 2008
  4. Pete LSD

    Pete LSD Regular Member

    Joined:
    Apr 25, 2002
    Messages:
    6,297
    Likes Received:
    13
    Occupation:
    Soul Searching
    Location:
    Canada
    No, the next target is 35.0 lbs X 38.5 lbs :D.

     
    #4 Pete LSD, Nov 17, 2008
  5. cooler

    cooler Regular Member

    Joined:
    Apr 25, 2002
    Messages:
    21,811
    Likes Received:
    23
    Occupation:
    Surfing, reading fan mails:D, Dilithium Crystal hu
    Location:
    Basement Boiler Room
    u sure r pushing your load spreader:D:p
     
    #5 cooler, Nov 17, 2008
  6. Optiblue

    Optiblue Regular Member

    Joined:
    Jun 4, 2004
    Messages:
    703
    Likes Received:
    20
    Occupation:
    I just show up
    Location:
    Canada, BC, Burnaby
    no problem as long as prestretch feature isn't running!
     
    #6 Optiblue, Nov 17, 2008
  7. ray_mond

    ray_mond Regular Member

    Joined:
    May 10, 2007
    Messages:
    140
    Likes Received:
    0
    Location:
    Toronto
    less than 170 usd for the whole thing?! or 170 usd for shipping?
     
    #7 ray_mond, Nov 17, 2008
  8. maa2003

    maa2003 Regular Member

    Joined:
    May 7, 2006
    Messages:
    1,449
    Likes Received:
    1
    Location:
    Jakarta, Indonesia
    for express shipping cost only ....

    Maxline also quoted me, but express shipping is expensive than machine price, so buy directly from factory ..
     
    #8 maa2003, Nov 17, 2008
  9. Sgbad

    Sgbad Regular Member

    Joined:
    Sep 17, 2007
    Messages:
    1,517
    Likes Received:
    1
    Occupation:
    bumming around
    Location:
    Singapore
    Nice machine bro, please post pictures of your machine to share with us.:D
     
    #9 Sgbad, Nov 18, 2008

Share This Page