Results 1 to 8 of 8
Thread: Buying 1st Stringing Machine
12-30-2008, 12:12 AM #1
Buying 1st Stringing Machine
Hi all, i planning to buy my very first stringing machine. I found Eagnas stringing machine, and just want to get some advice if i should buying this machine or not, it is really worth it for $400 AUD.
12-30-2008, 12:44 AM #2
I would not trust those side supports.
12-30-2008, 06:46 AM #3
I've bought that exact machine in Australia brand new for approx A$600.
Are you getting the machine brand new or second hand?
The side support is not the best, but they are sufficient. As discussed on another thread, good head/throat internal support is more important than good external side support.
Therefore, I would recommend also getting load spreaders for the head/throat support.
P.s. the photo you've posted looks like it has tennis clamps... so make sure you get the ones for badminton
12-30-2008, 08:42 AM #4
12-30-2008, 11:37 AM #5
12-30-2008, 01:59 PM #6
12-31-2008, 02:35 AM #7
The racquet support is of major importance for badminton and there is a lot said about this item in this threat: http://www.badmintoncentral.com/foru...ad.php?t=49615
But one thing is for sure this support is not too good for badminton. The supports can not be placed closer to the 12 and 6 o'clock position and they are too close to 3 o'clock for badminton.
This is a major matter, the closer you get to 3 o'clock the higher the stress in the racquet between the support and 12 o'clock.
12-31-2008, 08:08 PM #8
yes, it a used machine
By diverdan in forum Badminton Stringing Techniques & ToolsReplies: 0: 02-26-2012, 03:32 AM
By johnnyytruong in forum Badminton Stringing Techniques & ToolsReplies: 1: 05-13-2011, 09:30 PM
By risingsun in forum Badminton Stringing Techniques & ToolsReplies: 5: 12-10-2008, 10:14 AM
By calfunz in forum Market PlaceReplies: 24: 10-07-2007, 12:06 AM
By CKsweden in forum Badminton Stringing Techniques & ToolsReplies: 51: 11-30-2005, 11:23 PM