Results 18 to 25 of 25
09-15-2011, 10:03 AM #18
maybe sir,,they really dont have manual in the box,,i just want to know how to operate the tension head correctly..the tension head is like the eagnas pro crystal II and smart 5000 model,,im still uploading the pic but it doesnt work sir..hope you can help me sir..how does the the C and M works sir and also the knot sign?? please help me sir...thank you
09-15-2011, 10:13 AM #19
knot sign=increase or decrease tension for the knotting string.
it has 2 tension setting. 1 is normal through out main and cross. if you set the tension then press m. that is your main tension. after you tie off the main, press c then the tension will automatic goes up or down based on what you set.
09-16-2011, 12:02 AM #20
oh ok,,do i have to press the M or C sign every time before i will press the pulling button sir??thank you so much again sir
09-16-2011, 12:30 AM #21
09-16-2011, 01:00 AM #22
1) Don't buy Eagnas crap.
2) No, you don't need to press M every time. Just pres it and set the tension.
3) the M and C function are crap if you can not figure out how to program the Cross adding 10%
4) Just turn it on, set your tension. String mains. Add 10% on then string cross.
06-14-2012, 03:42 AM #23
The information has given me a better understanding of stringing and to seriously consider to get one or not. Have considered ST-200 Stringing Machine, but didn't get it.
06-18-2012, 11:03 PM #24
hello out there..just asking how to reset the pulling tension of electronic stringing machine mine is eagnas combo5060? Someone said the VR1 and VR2 is the key on how to reset but no further info,, anyone help me how to reset coz my machine now can only strung 27lbs and above,,26lbs down cant...minimum 27lbs only..also if 27lbs the pulling tension very slow..thanks guys
10-03-2013, 01:10 AM #25
Anybody from this forum have experience in buying stringing machine in Malaysia ? I am hoping that I could get 1 locally instead of getting from oversea ( it will be my last choice if I need to ).
I need a stringing machine which is quite easy to get hands on as I am just about to learn on stringing my own racket.
Hope that forumers here could give some advice for me.
By bayanbaru in forum Badminton Stringing Techniques & ToolsReplies: 0: 09-12-2011, 09:38 AM
By DMKan in forum Badminton Stringing Techniques & ToolsReplies: 20: 08-01-2011, 05:23 AM
By johnnyytruong in forum Badminton Stringing Techniques & ToolsReplies: 1: 05-13-2011, 10:30 PM
By NaNo-TiMe in forum Badminton Stringing Techniques & ToolsReplies: 7: 12-31-2008, 09:08 PM
By CKsweden in forum Badminton Stringing Techniques & ToolsReplies: 51: 12-01-2005, 12:23 AM