Results 103 to 119 of 253
05-28-2009, 08:49 AM #103
Since you have been stringing with the Wise tension head. I am curious on what do you think about your own stringing job. Does it give you the pop and make your string come alive?
05-28-2009, 12:44 PM #104
..we shall possibly see and read a review on it after this weekend's Bay Area Corporate Badminton Championships..
05-29-2009, 01:23 AM #105
Do you mind to measure how long the horizontal bar?
I just received my Wise but it can't even clear the turntable.
05-29-2009, 01:57 AM #106
05-29-2009, 02:08 AM #107
05-29-2009, 02:11 AM #108
05-29-2009, 02:19 AM #109
05-29-2009, 02:24 AM #110
05-29-2009, 03:47 AM #111
in order to make a fair comparison, i need to break the strings on my AT700 and my ARC10 first. both of which are my main racket and i know the string job is very good from Mister Keen. after i restring them, then i can make a fair comparison.
too bad i didn't get a 2nd ARC10 or AT700 to A/B compare with. i ran out of cash when i was in HK.
05-29-2009, 09:21 AM #112
05-29-2009, 10:01 AM #113
1) What happen to the original mounting kit? It should allow you to slide the WISE with min effort?
2) If the tension head is too high, can you raise the side mount about 5mm higher just like Kwun did?
3) If all thing fail, only screw in the top screw hole into the lower screw hole on the horz bar.
05-29-2009, 05:07 PM #114
1) I have the portable HQ machine, it looks like Kwun's however I just found out the horizontal bar is shorter by 8cm compared to Kwun's. With the original mounting kit, it fit for much taller (or wider?) horizontal bar.
2) At the moment since my bar is too short, I can't even fit Wise like the way Kwun did.
3) I thought about this too for both legs, but I will try to find out if I can custom made a horizontal bar before raising the legs.
05-30-2009, 03:11 AM #115
3) custom making horizontal bar will be the ideal solution. you can customize the turntable height and everything will fit well. not the cheapest solution though depending on the fabrication cost at your part of the world.
do let us know what solution you end up with.
05-30-2009, 09:48 AM #116
1) At this point, I prefer not to use the original mounting for 2 reason, First I want to keep it as compact as possible without adding more height, actually your WASE is excellent since its very compact and second I find the thickness of the horizontal bar is thinner than the space in the original mounting.
Monday is public holiday so most probably earliest I can contact the engineering shop is Tuesday, mean time I will try to sketch or draw what I had in mind.
05-30-2009, 12:26 PM #117
05-31-2009, 02:54 AM #118
yep will definitely update here. Yes I was thinking to add thickness on the area to mount Wise to make it more solid however depend on what the person will say and how much it will cost. At the moment after quick measure and drafting, this is what the bar look like:
1cm on each end is for the leg
1cm next to left is to give gap between leg and turntable
4cm (and raised by 1.2cm) turntable and the raise will clear the shaft about 0.5cm
17.5cm for the end of knob(turntable) to clear and give about 2cm clearance to the gripper
30cm for the Wise length (total Wise length 32.5 but 2.5cm from left side to gripper side which will be under the knob anyway)
0.5cm to give gap from Wise to the right leg. so total 55cm.
I still reviewing it though. Kwun's bar 54cm and Kwun need to swap left leg with turntable to clear the Wise. After I did my measurement, my bar will only be 1cm longer without swap hopefully nothing wrong.
05-31-2009, 05:06 AM #119
as for making the bar wider. you also need to think about how to actually mount the WISE onto the bar. the bolt need to be threaded onto something. it is either a nut or the bar itself. if the bar itself, then you need to cut the thread.
By kwun in forum Buy & Sell - Read the rules sticky before you postReplies: 17: 05-29-2013, 12:24 PM
By epermana in forum Buy & Sell - Read the rules sticky before you postReplies: 5: 01-21-2013, 10:33 AM
By Tomsk in forum Buy & Sell - Read the rules sticky before you postReplies: 6: 05-25-2011, 07:52 AM
By cobrien11 in forum Badminton Stringing Techniques & ToolsReplies: 2: 04-11-2010, 06:26 PM