Results 1 to 14 of 14
05-30-2010, 11:56 PM #1
Who overgrips on there overgrips?
I do does anyone else?
05-31-2010, 12:05 AM #2
Why? Just get a larger sized handle...
05-31-2010, 12:08 AM #3
1. electrical tape over the original
2. overgrip over the electrical tape
both just add 1.3 - 1.5mm thickness to the original which i find still comfy.
06-09-2010, 09:49 AM #4
Just bought a At600, and had an overgrip on it from the shop, on top of the original. Have also put another overgrip on, and still think it's a little on the thin side!!
06-09-2010, 08:41 PM #5
Do you guys recommend putting towel grip on dry grap for extra sweat absorbing?
06-10-2010, 07:18 AM #6
I used to like bigger grip size when I was younger. Now, I stick to thinner ones.
06-10-2010, 11:15 AM #7
I do for the top half of the handle. This is so that I have a thicker grip nearer the cone and a thinner one nearer the butt.
06-10-2010, 01:33 PM #8
06-10-2010, 02:09 PM #9
I just tend to have a Karakal grip underneath an overgrip. I always remove the original grip as it seems so pointless being there. Its so thin it might as well not be there for me.
Seems a bit daft to overgrip your overgrip. Though i suppose if u want a certain racket and can't get the right size handle then its works.
06-11-2010, 05:35 PM #10
It depends on the "G" size..
06-25-2010, 09:45 AM #11
07-04-2010, 10:13 PM #12
If you don't put tape over the original, when the times comes to change the grip the adhesive will stick to the original grip making a mess.
I use sellotape or shrinkwrap so its easy to change grips
07-05-2010, 07:19 AM #13
to maintain the original appereance of the racket I always use a yonex overgrip
[Yonex Super Grap Overgrip (AC102EX)]
the advantage of this grip:
easy to assemble and easy to remove without destroying the basic grip especially for the rackets of yonex.
if you still feel that you need a bigger handle just add an overgrip you like over the AC 102 EX
so you neednīt put so much effort in removing the overgrip
p.s. I would be careful if you use towel grips.
if you wrapp it till your shaft it might damage your paintwork like by my AT500 before
so be carefull maybe I also was too impatient
07-06-2010, 10:56 PM #14
i always remove the original grip that comes with the rackets before applying any grip
By foshomo03 in forum Buy & Sell - Read the rules sticky before you postReplies: 0: 03-08-2009, 12:38 AM
By Roman00 in forum Market PlaceReplies: 5: 01-13-2007, 04:52 PM
By bdmntnbdmntn in forum GripReplies: 1: 09-03-2006, 10:34 AM
By yoyomonkey in forum GripReplies: 31: 08-20-2006, 09:11 AM
By confuzzledfreak in forum GripReplies: 25: 04-21-2004, 05:47 PM