Results 1 to 7 of 7
04-08-2010, 03:56 AM #1
what can cause a racket (Y NS8000) to WARP after it has been strung (at 22lbs only) on a 6 point machine? I'm curious as the guy brought back his racket and asked me too many questions. I offered to re-do the string for him after putting the racket in a press for 4 days (w/o string) to flatten it. Thnx
04-08-2010, 04:49 AM #2
Was it like that when you had finished stringing it ?
04-08-2010, 05:00 AM #3
HONESTLY if it was it was not noticeable. Its is in fact NOT very noticeable. It was reasonably flat out of the press and now I did it again and it warped again. Ever so slight but when u know u look for it.
04-08-2010, 05:06 AM #4
seems like it a fault in the racket itself and for that to happen at 22 i would expect that at something alot higher
04-08-2010, 08:07 AM #5
Is this NS8000 real?
Is it broken?
I have seen ns8000 warped only once - it was broken and repaired with a epoxy compound. And repaired slightly at angle :-). It was holding 10 kg well - but looked very ugly with string surface not beeng flat.
04-08-2010, 08:55 AM #6
This one is sound and real enough.
04-08-2010, 11:29 AM #7
the way you mount? maybe you didn't +2lbs n cross?