Results 324 to 340 of 394
06-13-2012, 05:35 PM #324
06-13-2012, 07:13 PM #325
i have used michal's more than 1 year and it is very good ... i put the original side support on the box now.
06-13-2012, 07:31 PM #326
I actually just cut pieces of graps and tapped them onto the side supports so that the strings rub against the graps instead of the sides supports. This will prevent the strings from being "cut" by the edges of the supports.
Let me know if you need pictures of how I did it.
06-15-2012, 01:00 AM #327
Thank you for your promptly reply, Alex82.
I just bought a pair of load spreaders and seized the opportunity to buy a Hi-Qua flying clamp too, all with free shipping! Things like these can not be found in Brazil. By the way, is this a safe store to buy Yonex or Victor rackets?
I´m not an experienced badminton stringer at all. So, your help is much appreciated:
When I mount rackets on my (Eagnas Combo 710) stringing machine I certify myself that the racket's frame is touched, but not deformed by the central posts. Then, I move the side mounts until they just touch the frame. There is no perceptible frame deformation or movement at all (when the posts or side mounts touch the frame). Is this the procedure to follow?
I belive that the posts have a very hard (yellow) plastic padding and, as it is straight vertically and rounded horizontally, it touches only a very limited area (or even a point) of the frame (especially when the frame is rounded vertically, like box frames), concentrating forces...
Please, see the pics of the last racket (a new racket) I strung at 24lbs (tension was electronically calibrated). Is that dent between the top center grommets normal (when stringing without load spreaders) or was the racket really damaged? The dent is hardly visible in side view, but not in front view, as you can see.
Thank you very much.
06-15-2012, 01:19 AM #328
can you also make a pic from a mounted racket? i have a similar machine and i don't have such problems. the mounting procedure from you looks good.
do you have this problems with all type of rackets? maybe its a problem, that the racket frame is very weak (fake rackets).
gscastor liked this post
06-15-2012, 05:47 AM #329
[QUOTE=gscastor;1916805]Thank you for your promptly reply, Alex82.I just bought a pair of load spreaders and seized the opportunity to buy a Hi-Qua flying clamp too, all with free shipping! Things like these can not be found in Brazil. By the way, is this a safe store to buy Yonex or Victor rackets?
Mybadmintonstore is a genuine and legit store. For everything they sell, its genuine.
06-15-2012, 06:41 PM #330
06-20-2012, 05:47 AM #331
06-20-2012, 09:37 AM #332
I have got the package in good condition of the Michal's Side Support, it only took 5 days to reach Singapore upon payment received by Bro Michal.
I have strung 2x rackets with the side Support, got to say that it sits perfectly on the clamping arms of my Eagnas Combo 810 and support on rackets are superb. Putting in string on the grommets on the support was never been so easy and rounded edges of the side support will not make the string entangle or stuck when we are weaving.
Will definitely recommend this to friends.
06-23-2012, 12:03 AM #333
1st: This is an Yonex Nanospeed 100 (codes: 2424193 & 140594BR). Cannot be fake. I bought it from a Brazilian dealer that has a very good reputation, although do not trade hi-end badminton rackets. Besides, no one would waste time making a low-end fake racket. I did not perceive any visible damage to this frame just after stringing at 22lbs (max tension supported). When i note the dent on the 3rd strung racket (that seen on my previous post), I checked it again and noted what seems to be a crack between the top middle grommets (parallel and above the lead tape).
2nd: This is a RKEP PRO6000 racket. I bought it directly from Squash_Eric. It is being advertised in this forum (http://www.badmintoncentral.com/foru...dminton-racket) and the seller has a very good reputation. Cannot be fake. The racket had no traces of damages after stringing at 24lbs (max rated tension is 26lbs). Besides, the frame has a flat inner wall that provides better contact with the post of the stringing machine.
3rd: It is a RKEP PRO9000 WOVEN Ti racket (that seen on my previous post). I bought it directly from Squash_Eric. It is being advertised in this forum (http://www.badmintoncentral.com/foru...dminton-racket) and the seller has a very good reputation. Cannot be fake. The racket had a dent after stringing at 24lbs (max rated tension is 26lbs), as seen before.
Thank you again.
06-23-2012, 12:15 AM #334
Here are the missing pics on my last post (post #333):
Yonex Nanospeed 100:
08-24-2012, 02:37 AM #335
Hi Michal. I currently use Eagnas machine, but their side support is very disappointing. Can you please let me know how to buy yours, including price of the item and shipping costs to my place (Australia)?
09-27-2012, 04:29 PM #336
Hey guys....I was tired of having the clamps always dropping and having to lift it all the time so I had these springs made.. I have a bunch of extra sets, so if anyone wants a pair, pm me. Works great for tennis too...
09-28-2012, 04:38 AM #337
09-28-2012, 06:14 AM #338
I just use a couple of tight rubber O-rings to prevent it dropping too far down. You can also just use an elastic band wound around the shaft of the clamp so it drops just below the strings.
09-28-2012, 10:00 AM #339
I had to shorten the springs a little also, but did not cut them, I just compressed them and hit them with some heat and cooled it off in cold water......(heat treated for longevity now) LOL
01-01-2013, 04:49 AM #340
Update. All versions (for crank, drop weight, electronic, for Wise2086 improvement, Pro'S Pro/Eagnas, Gamma 6006, Alpha Shuttle Express etc) are available. Unusual projects too.
Some unpublished pictures below.
By Mark A in forum Buy & Sell - Read the rules sticky before you postReplies: 0: 12-21-2011, 04:49 PM
By sadlonelylad in forum Badminton Stringing Techniques & ToolsReplies: 2: 11-13-2011, 10:02 PM
By Pete LSD in forum Badminton Stringing Techniques & ToolsReplies: 52: 04-19-2007, 05:04 PM
By vatovey in forum Badminton Stringing Techniques & ToolsReplies: 1: 01-10-2007, 02:22 PM
By Michal in forum Badminton Stringing Techniques & ToolsReplies: 29: 12-18-2006, 11:00 AM