01-10-2010, 10:56 AM #1
Best strings for Ti10 and tension?
recently got Yonex Ti10 - third gern. Can any Pro recommend what strings and tension? Prefer thinner strings but duno which?
I smash alot and with good wrist power....but lack of stamina...HAHA
Last edited by dollargood; 01-10-2010 at 11:01 AM.
01-10-2010, 10:39 PM #2
01-11-2010, 12:10 AM #3
01-11-2010, 06:39 AM #4
isn't 26 a bit high for Ti10? i heard the 3rd gen isn't a durable as 1st and 2nd...
01-11-2010, 06:44 AM #5
Zymax 62 or 67. I personally like the 67 must better than the BG80, more repulsion, power and holds tension better. Zymax 62 is supposed to be better than the BG66 (more repulsion, power and holds tension better). I've used it a few times but preferred the 67 (being an ex BG80 fan )
Tension (depends what tension you are used to playing with).
01-11-2010, 06:57 AM #6
01-11-2010, 07:08 AM #7
26 is good for apacs rackets that i've used, as they feel 2-3lb less then same tension with my yonex MP100...
i think the recommendation for Ti10 is around 20lb ~6 over the recommend limit seems a bit of a risk, i'm pretty sure Ti10s do well with 22-24... if your scared go for BG65 cuz then you can try it out since it loses tension relatively quickly...
01-11-2010, 11:43 AM #8
for any intermediate player don't know which string and tension they would like , a good start point is BG80 at 24lbs. If you feel great at first week, you could add another lb at next job. If you feel tight as board lost power at first week, but feel better two weeks after, reduce 1 lb at next job.
I found most adult player with 2 or 3 years experience at OK shape could handle 23lb BG80 with a medial flax racket. 21 or 22 with stiff racket.
If you tell me you play well with BG80 over 25lb, and you don't know which string and tension to get. then it would confuse me about your level of playing. Because you ask a beginner question but with advance play level.
01-11-2010, 12:46 PM #9
I have framed it a few times but not many, the paint as well as the frame are durable so far in my experience. However with any racket I'm afraid to go above 26 though.
01-13-2010, 12:01 PM #10
How about BG66 strings?
01-13-2010, 04:36 PM #11
01-13-2010, 06:04 PM #12
BG 65, on my Yellow Ti-10 lasted only 3 weeks...
I gave it for re stringing today....
It didnt break, but the strings had worn out at the sweetspot...
I was sure that, one touch with my nail would snap it..
Plus a tournament starts on Saturday, so I need fresh strings..
And No 26 isnt all that high...
Mine is strung at 29lbs ECP.
01-13-2010, 06:07 PM #13
I say BG85 @ 23/24lb...i wouldn't go too high with yonex rackets if you plan on playing with them for a while.
01-18-2010, 09:42 AM #14
How about Yonex BG98 strings? Any Pro try it before?
01-18-2010, 11:06 AM #15
I strung my Ti10 3rd gen before with:
From my view, all 3 strings work very well with Ti10. However Bg66 suffers from his durability. I feel Nbg98 is the improved version of Bg66, Nbg98 has the best power when smashing, slightly better than Bg80 but the price is much higher than Bg80. So Bg80 is the final choice of my Ti10.
Hope this helps.
01-26-2010, 05:42 AM #16
Max string tension for the Ti10 3rd gen? I intend to go higher, current is 25lbs...which string best for high tension for this new gen racket?
01-26-2010, 05:36 PM #17
durability of nbg98 is great as well as its power. However i felt it lacked feel to it. Although my tension was not high when i first used it. I hope to use it again soon at 30 lbs
By d3sm0nd in forum Badminton StringReplies: 4: 07-17-2009, 01:06 PM
By cwlan in forum Badminton StringReplies: 10: 05-27-2002, 06:42 AM
By david in forum Badminton Rackets / EquipmentReplies: 9: 01-20-2002, 09:19 PM
By Spinner in forum Badminton StringReplies: 3: 01-11-2002, 05:01 AM
By shaun in forum Badminton StringReplies: 10: 04-14-2001, 10:00 PM