Borked my ArcSaber Z-Slash

**mchan065** · 02-24-2010, 04:09 AM

Originally Posted by PapA_xlonG

U restrung ur ArcZ 4 times (NBG95, NBG98, BG66M, BG80) with 25~26lbs.
May i know which string worked best with u ??

I don't believe i am able to claim warranty as I strung it over the recommended tension (max i strung was 26lbs). Therefore, warranty voided.

Of those 4 strings listed above, I liked the NBG 98 the best. Didn't really get to test the BG80 as I only got it restrung with BG80 the day before i broked it lol =p

**mchan065** · 02-24-2010, 04:21 AM

Here's a pic of the crack. Sorry, used my laptop camera. If strung (i.e with some tension) the racket would start to cave and bend.

**Matt** · 02-24-2010, 02:21 PM

Originally Posted by mchan065

I don't believe i am able to claim warranty as I strung it over the recommended tension (max i strung was 26lbs). Therefore, warranty voided.

Of those 4 strings listed above, I liked the NBG 98 the best. Didn't really get to test the BG80 as I only got it restrung with BG80 the day before i broked it lol =p

As long as the racket is stringed properly, you can go and try to claim it, otherwise it would be voided.

**druss** · 02-24-2010, 04:21 PM

Agreed, all Yonex can do is say no so any chance, no matter how slim, is better than no chance if you don't try at all.

**vincenterika** · 03-03-2010, 04:45 PM

Oh.......seems too high tension

**ooisocksiang** · 08-11-2010, 01:30 PM

Same case here... my racket frame sunken in at 11 and 1 o'clock position. My stringer said same case with all other Z-S that he sold. My fren is very interested with 8DX, does it face the same issue? Anybody that have 8DX that wanna share their experience?

I'm interested in the new Z-S Taufik model... is this racket improved from the ori Z-S??!!

Yonex top range tend to have this design flaw - Ti-10 & Armotec - sunken at 5 & 7 o'clock position.

Hope all the racket owner can share their experience.

I'm now using Gosen, not bad... not bad at all

I'm using Ryoga Tenbu & Issen.

**wan.hasbullah** · 08-12-2010, 01:23 AM

have you all check your racket string with this after getting your racket...

http://www.yonex.com/badminton/strin...ons/index.html

maybe there some stringing technique failure...

**j4ckie** · 01-09-2011, 07:27 AM

Originally Posted by ooisocksiang

Same case here... my racket frame sunken in at 11 and 1 o'clock position. My stringer said same case with all other Z-S that he sold. My fren is very interested with 8DX, does it face the same issue? Anybody that have 8DX that wanna share their experience?

I'm interested in the new Z-S Taufik model... is this racket improved from the ori Z-S??!!

Yonex top range tend to have this design flaw - Ti-10 & Armotec - sunken at 5 & 7 o'clock position.

Hope all the racket owner can share their experience.

I'm now using Gosen, not bad... not bad at all

I'm using Ryoga Tenbu & Issen.

The TH ZSlash is just a repainted ZSlash, just like the PG and LCW Versions. The racket itself wasn't changed at all.

**bazzaman** · 02-20-2011, 10:54 PM

I just gave one to Rose- HK to send back to Japan for inspection under warranty.

They said that there was a high chance that the racquet would not be returned if it was voided.