CW and TH Grip

**LD rules!** · 10-03-2010, 01:34 PM

Originally Posted by george@chongwei

Here's mine

.........1st time trying

very good for your first attempt

**Thom_bad** · 10-03-2010, 04:48 PM

hey George which grip size do you use ??

**george@chongwei** · 10-04-2010, 12:41 AM

2U G5....

Which one stands for the grip size btw?

**maximR** · 10-04-2010, 02:12 AM

The overgrip is applied straight on wood with electrical tape or have to add replacement grip first ?

**Tamagi** · 10-04-2010, 03:41 AM

Here's my attempt. No athletic tape or excess grip underneath, but 50% overlaps to double the grip thickness. Just about perfect for me on a G4 sized grip. I had it done with excess grip at the bottom too, and liked it even more. Better feedback of the racket handle as I tend to grip the racket towards the bottom.
Now the balance point on the Arcsaber 10 is around 320mm and 330mm on an Armortec 500…

**ziggy87** · 10-04-2010, 04:11 PM

first attempt

it seems to be thicker on 1 side of the bottom but still it feels good..just by holding it and swinging it around

off topic: it's my first time using Victor Nanotec replacement grip. the glue at the bottom seems to be less sticky compared to Karakal PU grips

**maximR** · 10-06-2010, 01:04 AM

Same question, one more time since I didn't get any reply on this matter. Sorry. The overgrip is applied straight on wood with electrical tape or do I need to put on a replacement grip first ? Does LCW apply a replacement grip before adding the overgrip ?

**maximR** · 10-06-2010, 01:18 AM

Okay, got it. Straight on wood. Thanks.

**ziggy87** · 10-06-2010, 01:26 AM

Originally Posted by maximR

Same question, one more time since I didn't get any reply on this matter. Sorry. The overgrip is applied straight on wood with electrical tape or do I need to put on a replacement grip first ? Does LCW apply a replacement grip before adding the overgrip ?

isn't that up to your preference? if you prefer it to be thicker, you can apply something on the wood first to make it thicker?
i prefer to add a layer of electrical tape on the wood before applying the grip. this is to ease the process of removing the grip without leaving a lot of residue.
regarding the LCW style, wait for other people's answer. i have no idea neither do i really care

**Thom_bad** · 10-06-2010, 05:59 AM

Ziggy your pic looks off topic...is it LCW style ?

The gripping style we are talking about here is for over grip only

And the main tip is to put the over grip reverse

**ziggy87** · 10-06-2010, 11:41 AM

Originally Posted by Thom_bad

Ziggy your pic looks off topic...is it LCW style ?

The gripping style we are talking about here is for over grip only

And the main tip is to put the over grip reverse

erm..i used the same concept

i did add the extra piece of grip at the bottom
and i start gripping using the broad end, not the "sharpie" end
i followed Demolidor's video
but because i'm using a replacement grip, the bulge at the bottom didn't seemed to be that big
it does feel good though

**Babyface** · 10-07-2010, 10:06 PM

**Blitzzards** · 10-07-2010, 10:14 PM

Originally Posted by Babyface

Nice! That's one of the best replication of Taufik's towel grip style I've seen.

**Babyface** · 10-07-2010, 10:48 PM

lol... thanks mate... its a bit loose due to heavy use (due to need a new grip)
Always had the 3/4 grip.. adding the bulge at the end just made it more comfortable.

**george@chongwei** · 10-07-2010, 11:07 PM

That bulge the end there also from overgrip?

why are u wrapping the end of the grip taufik style but above that lin dan style?

**Babyface** · 10-07-2010, 11:14 PM

no, its not from overgrip.. and as i said, i have always wrapped up 3/4... and towelling at the bottom is to stop the plastic end rubbing onto my hand