Results 1 to 13 of 13
Thread: stinging issue - need help
04-14-2010, 06:10 AM #1
stinging issue - need help
I bought a new racquet AT900p from a shop. The shop owner strung the racquet for me. I was happy as Larry.
when I got home, i realised theres a mark at 12 o'clock.
Can someone please advise me if the mark is a result of bad string job or?????
04-14-2010, 06:16 AM #2
From my experience, all armortecs have this line. As long as it's not a crack (doesn't seem like it) it's fine.
04-14-2010, 06:25 AM #3
I AM RELIEVED!!!!!!!!
Any other comment?
04-14-2010, 06:53 AM #4
that's a mark for centre-main-grommet of the racket.
04-14-2010, 07:47 AM #5
all comments are welcome
thanks all for meaningful comments
04-17-2010, 07:27 PM #6
That's the mark from Yonex (to inidicate the center), not the stringer. S/he did not do anything wrong with that.
04-17-2010, 07:29 PM #7
its on all rackets *at least on yonex*
04-18-2010, 07:49 AM #8
Over tightening the end posts can put a small crack at the 12 o'clock position if not using a load spreader. I would think the crack would be on the inside of the frame, not the outside. Probably everything is fine.
04-18-2010, 04:09 PM #9
Looks like a mold seam to me - it's on any YY with that decaled grommet tape. It's marks on the inside of the frame that would worry me.
04-18-2010, 05:01 PM #10
It looks fine as long as there is no creasing in the paint work due to over tightening it should be fine
04-18-2010, 09:29 PM #11
as said above, this is the center of the racket (exact 12 o'clock location). it should also be at the same spot as the little triangle indicator on the side of the frame.
04-19-2010, 08:02 AM #12
04-19-2010, 10:20 AM #13
Yonex needs to put a huge red dot on the centre mark at each end, or at least a stylised key that fits in with the rest of the racket - it's EVERYWHERE in tennis, and Panda rackets have them.
By silentheart in forum Badminton Stringing Techniques & ToolsReplies: 4: 02-01-2012, 07:40 PM
By badwally in forum Buy & Sell - Read the rules sticky before you postReplies: 1: 11-18-2008, 07:03 PM
By Pani1997 in forum Market PlaceReplies: 4: 02-06-2007, 05:08 AM
By Nick in forum Badminton Rackets / EquipmentReplies: 12: 08-30-2002, 03:44 PM
By Nick in forum Market PlaceReplies: 12: 08-30-2002, 03:44 PM