User Tag List

Page 1 of 2 1 2 LastLast
Results 1 to 17 of 33
  1. #1
    Regular Member
    Join Date
    Jan 2003
    Location
    canada/quebec/montreal
    Posts
    21
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Question stringing machine!?!?!!?!?

    hey people

    I've been playing bad.. for quite a while now and latle few month's ago an old friend of mine teached me how to string my rack.... as you can imagine i string my one rack.. since...... but i want to ask you guy' ssomething.

    I notice that when i tring with a manual crank machine somehow then tention is not that exact .... and on the other side when i get the chance to tring it with a electronic machine ... it's really tigh ...

    Any of you now how to string a rack... and have any suggestion about stringing racks.... any tips would be apreciated ...

  2. #2
    Regular Member
    Join Date
    Apr 2002
    Location
    Surrey, Canada
    Posts
    1,534
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: stringing machine!?!?!!?!?

    Originally posted by biggy
    hey people

    I've been playing bad.. for quite a while now and latle few month's ago an old friend of mine teached me how to string my rack.... as you can imagine i string my one rack.. since...... but i want to ask you guy' ssomething.

    I notice that when i tring with a manual crank machine somehow then tention is not that exact .... and on the other side when i get the chance to tring it with a electronic machine ... it's really tigh ...

    Any of you now how to string a rack... and have any suggestion about stringing racks.... any tips would be apreciated ...
    1. Never trust the numbers printed on the cranks or tensioner. Unless it just came out from the factory, even then you don't know, the tensioning springs might not be precise. Obtain a good calibration tool. You also have to check your calibration too from time to time.
    2. when you start your string job - try to complete it in one session. don't start then walk away doing something else. maintaining constant tension on the string in every pull is important. It also ensure even stretching as well.
    3. DON'T WORRY WHETHER YOU USE 2 KNOT or 4 KNOT METHOD. (search on that) It really doesn't matter, it is up to your technique that you learn from your friend. If you are comfortable using the method - stick with it. Later you can experiment for yourself, and you make your own decision.
    4. keep your work area clean. be careful when you are unraveling the string not to kink or snag the string on corners or edges. The string is very delicate.

    5. MOST IMPORTANT - SEARCH THIS SITE BEFORE YOU ASK QUESTIONS - CHANCES ARE THESE QUESTIONS HAVE BEEN ANSWERED AND DEBATED DOZENS OF TIMES ALREADY.

  3. #3
    Regular Member
    Join Date
    Apr 2002
    Location
    Surrey, Canada
    Posts
    1,534
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Oh yeah ... do 20 pushups before you do your next string job. Don't ask why - just do it! It really does help your stringing technique. Many of the other stringers here also do the same, each time they are about to string....

  4. #4
    Regular Member
    Join Date
    Apr 2002
    Location
    Coquitlam
    Posts
    1,045
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Originally posted by badrad
    Oh yeah ... do 20 pushups before you do your next string job. Don't ask why - just do it! It really does help your stringing technique. Many of the other stringers here also do the same, each time they are about to string....
    HAHAHAHAHAHAHA

  5. #5
    Regular Member
    Join Date
    Dec 2002
    Location
    ontario, canada
    Posts
    180
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    I am in the process of purchasing a drop weight machine myself and am wondering if one can use one of those digital guages that fishermen use to calibrate the tensioner. With them being digital, I'm assuming that they would be accurate.

  6. #6
    Regular Member
    Join Date
    Apr 2002
    Location
    Surrey, Canada
    Posts
    1,534
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    actually any fish scale or commercial scale would work. you do need to test the calibrator itself occasionally - but that can be a simple weight you know to be accurate. Usually dumbell weights are accurate to within 15%. Matter of testing one to become your reference point.

    I did notice though, surfing the eagnas site, their calibrator tool (tcg-100) is on sale $14.95. Scales, especially precision one for fishing or other industry are pretty pricey as well, so maybe the actual one is a good deal.

    I am using a plastic fish scale, and have found the precision within 1%. I have a hydraulic tensioner an older unit and it's tolerance is roughly 2.5% between pulls.

    hey ryeung - btw: same as me... badrad = ryeung.

  7. #7
    Regular Member
    Join Date
    Dec 2002
    Location
    ontario, canada
    Posts
    180
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Hi badrad (or should I say ryeung :-)).

    I want to thank you for all your input in a previous thread.

    I figured that a fish scale would work. I think you can get one for about $30 which will be about the same price as the eagnas one (by the time you factor in the shipping and exchange). Been meaning to get one for when I go fishing anyway, so it can do double duty. I can use some of the cast iron dumbell weights I have to calibrate the scale and they should be spot on.

    btw, I'm still debating on which stringing machine to get. Maxline ships ups ground and ups will charge about $50 cdn to handle the brokerage. Seems like a lot considering there is no duties to be paid, just pst + gst. I've been trying to see if they can send it parcel post as canada post charges only $5 for handling.

  8. #8
    Regular Member
    Join Date
    May 2002
    Location
    New York, US
    Posts
    10,283
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default

    Originally posted by ryeung
    I am in the process of purchasing a drop weight machine myself and am wondering if one can use one of those digital guages that fishermen use to calibrate the tensioner. With them being digital, I'm assuming that they would be accurate.

    Sorry for a stupid question...

    Why we need to calibrate a drop-weight string machine? I mean, it's pure mech parts, and no spring or anything can be losen up attached.

    I really don't think the tension should be varied unless the "weight" itself being heavily damaged.

  9. #9
    Regular Member
    Join Date
    Apr 2002
    Location
    Surrey, Canada
    Posts
    1,534
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    drop weights are very consistent, unless suddenly gravity changes on us. But the initial set up of your machine, there are usually some rough markings of the post that the weight slides on. it is not often that these post relates to a tension poundage, they are more for reference and location of the weight.

    using the calibration scale after you get your initial test pulls - you can mark off on the post the positions for the corresponding weight to be for the desired tensions. Usually, unless something screws up in the machine (you drop the machine or weight gets cracked, even aging of the parts (friction), etc) the marked settings should remain steady. So it might be advantageous to borrow one rather than buy one. I always had one even with my old drop weight just to be sure what tension, even though I had it marked off.

    Also, something to note, most factory markings on these posts - if any, are guaged to tennis tensions levels rather than badminton tensions.
    Last edited by badrad; 02-17-2003 at 01:53 PM.

  10. #10
    Regular Member
    Join Date
    Apr 2002
    Location
    Surrey, Canada
    Posts
    1,534
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Originally posted by ryeung
    Hi badrad (or should I say ryeung :-)).

    I want to thank you for all your input in a previous thread.

    I figured that a fish scale would work. I think you can get one for about $30 which will be about the same price as the eagnas one (by the time you factor in the shipping and exchange). Been meaning to get one for when I go fishing anyway, so it can do double duty. I can use some of the cast iron dumbell weights I have to calibrate the scale and they should be spot on.

    btw, I'm still debating on which stringing machine to get. Maxline ships ups ground and ups will charge about $50 cdn to handle the brokerage. Seems like a lot considering there is no duties to be paid, just pst + gst. I've been trying to see if they can send it parcel post as canada post charges only $5 for handling.
    Hey we may be related? I think we around same age - OLD...

    My scale cost around $12 at Canadian Tire. My wife sometimes steals to weight goods. Leaves crap all over it... It re-test it occasionally to make sure is true. I have some freeweights in various increments to ensure measures correctly.

    I think for maxline, they ship UPS because it is simpler for them. UPS pick up the shipment. Post does not, unless it's large corporation. I remember calling them once, it was like a small business operation. So probably if they were to send it by post, they have to drive the parcel out to the closest depot, and not worth their time and effort to save you money.

  11. #11
    Regular Member
    Join Date
    May 2002
    Location
    New York, US
    Posts
    10,283
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default

    Originally posted by badrad

    Also, something to note, most factory markings on these posts - if any, are guaged to tennis tensions levels rather than badminton tensions.

    Agree.

    For my Klipper M140, this machine is also designed for tennis. The marks are for tennis (with a heavier weight, and tennis string clamp).

    When I purchased this set for badminton, they gave me a lighter badminton weight, and 2 smaller baddy string clamps. Also, there's a "conversion table" printed on the machine, to let me know how to convert the marks. For example, if I want 20lb on baddy, it's like around 50 or 60 something on the original mark.

  12. #12
    Regular Member
    Join Date
    Dec 2002
    Location
    ontario, canada
    Posts
    180
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Originally posted by badrad
    Hey we may be related? I think we around same age - OLD...

    My scale cost around $12 at Canadian Tire. My wife sometimes steals to weight goods. Leaves crap all over it... It re-test it occasionally to make sure is true. I have some freeweights in various increments to ensure measures correctly.

    I think for maxline, they ship UPS because it is simpler for them. UPS pick up the shipment. Post does not, unless it's large corporation. I remember calling them once, it was like a small business operation. So probably if they were to send it by post, they have to drive the parcel out to the closest depot, and not worth their time and effort to save you money.
    I doubt that we are related. As far as I know, I don't have any relatives in BC. And I try darn hard to not think of myself as "old".

    It does appear that maxline is a small company. I did check at the post office and they told me the maximum weight is around 30 lbs. The 2 machines I am looking at, flex740 and easy3, both weigh in at over 50 lbs. I wonder if it is possible to not have ups handle the brpkerage. I assume that would mean that I would have to pick it up at whatever customs office that is the closest. Depending on where that is, may be worthwhile.

    Contrary to what I have been reading on different forums about maxline, they have been pretty good about answering emails. I generally get a reply within 24 hours. Only trouble is sometimes they don't quite answer the questions I asked.

  13. #13
    Regular Member
    Join Date
    Apr 2002
    Location
    Surrey, Canada
    Posts
    1,534
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Originally posted by ryeung
    I doubt that we are related. As far as I know, I don't have any relatives in BC. And I try darn hard to not think of myself as "old".

    It does appear that maxline is a small company. I did check at the post office and they told me the maximum weight is around 30 lbs. The 2 machines I am looking at, flex740 and easy3, both weigh in at over 50 lbs. I wonder if it is possible to not have ups handle the brpkerage. I assume that would mean that I would have to pick it up at whatever customs office that is the closest. Depending on where that is, may be worthwhile.

    Contrary to what I have been reading on different forums about maxline, they have been pretty good about answering emails. I generally get a reply within 24 hours. Only trouble is sometimes they don't quite answer the questions I asked.
    Nah... that's why we are forever YEUNG... hahahahah... Now that one's old.

    If you have them send it post, Canada Post will pick up the initial tab. You pay any duties or taxes at the post office when you collect it.
    I seem to remember answers from Maxline were based on their having a hard time understanding english... When I spoke to them by phone, they spoke Mandarin initially.

  14. #14
    Regular Member
    Join Date
    Dec 2002
    Location
    ontario, canada
    Posts
    180
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Originally posted by badrad
    Nah... that's why we are forever YEUNG... hahahahah... Now that one's old.

    If you have them send it post, Canada Post will pick up the initial tab. You pay any duties or taxes at the post office when you collect it.
    I seem to remember answers from Maxline were based on their having a hard time understanding english... When I spoke to them by phone, they spoke Mandarin initially.
    There is quite a charge from ups, about $50 while cp only charges $5. And there is no duty.

  15. #15
    Regular Member
    Join Date
    Apr 2002
    Location
    Surrey, Canada
    Posts
    1,534
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Originally posted by ryeung
    There is quite a charge from ups, about $50 while cp only charges $5. And there is no duty.
    That's good deal from CP. How will you handle the max weight problem?

  16. #16
    Regular Member
    Join Date
    Dec 2002
    Location
    ontario, canada
    Posts
    180
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Originally posted by badrad
    That's good deal from CP. How will you handle the max weight problem?
    I don't think that there is a way to handle the weight problem. I emailed maxline and asked them if they would consider splitting the package into 2. They just emailed back and ignored the question completely. Just said that it is more expensive to send by parcel post. And then repeated the ups shipping charges again. All things considered, eagnas machines seem to be the best bang for the buck. It's not likely that anyone else will split a package. Looks like I'm going to be stuck with the brokerage fees. Could always try to buy from Lily Co. directly but it'll probably more hassle than it's worth.

  17. #17
    Regular Member
    Join Date
    Apr 2002
    Location
    Surrey, Canada
    Posts
    1,534
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    that's too bad. $45 will go towards buying string supplies.

    My friend in Australia recently bought the Smart 909 from Eagnas. I think he dealt directly with Taiwan, the order was shipped from there. It took a month for delivery by sea, and when it arrived, it was missing some critical bolts and securing hardware. Although they promptly mailed out a replacement set for the missing hardware, my friend wound up having to go to local hardware store to obtain the missing pieces. If not he probably would have had to wait another two or three weeks until these other pieces finally arrive.

    He did some string jobs, and sent me two Ashaways with his string worksmanship. Impressive, tight - but we have a discrepancy in tension. He says he strung at 22/23, and I and few others felt it more like 26. Pete_lsd, WWC and Marky got a chance to see and hit with the Ashaway (TMP990) which is a dead knockoff of the MP99.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Stringing with Gamma X-2 Tennis Stringing machine
    By badmad in forum Badminton Stringing Techniques & Tools
    Replies: 3
    : 09-01-2011, 05:12 PM
  2. WTB: Stringing Machine (UK)
    By caspiali in forum Badminton Stringing Techniques & Tools
    Replies: 7
    : 04-03-2011, 02:33 PM
  3. FS: a stringing machine and all the stringing tools [UK]
    By cliffhu in forum Buy & Sell - Read the rules sticky before you post
    Replies: 2
    : 12-11-2009, 03:01 PM
  4. Yonex Stringing Machine Vs. Other Stringing Machine
    By anirban in forum Badminton Stringing Techniques & Tools
    Replies: 6
    : 05-19-2009, 08:37 AM
  5. stringing machine
    By jwu in forum Badminton Stringing Techniques & Tools
    Replies: 7
    : 09-28-2002, 06:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •