Results 1,973 to 1,989 of 2429
04-15-2012, 09:46 PM #1973
04-15-2012, 09:47 PM #1974
04-15-2012, 09:53 PM #1975
^^ could it be possible that stringer A's 26 lb and stringer B's 26 lb are not the same?
04-15-2012, 10:17 PM #1976
Thanks a lot guys for the advice. The way I see it now:
1. Subpar Stringer that causes vibration. I don't think so because I have elbow problem only with MX 80. I played with BS10, which many people considered stiff, BS 09, MX 60, Armortec limited, and VT 80. VT 80, which is classified very stiff, only tiring my arm not causing pain. Another argument is that my stringer is quite popular, he is sort of an official stringer when there are events, national or international in my city. And lastly, there are some people that also have elbow problem with MX 80
2. Strong muscle. I don't do any strength building (guilty). Maybe J4ckie and meteor could elaborate more on how to do off-court training and strength building.
3. Lower tension. I tried to lower the tension from 24-26 into 23-25, but I don't like lower tension. The feeling is difference. I think I will try again to go straight 24 lbs (without main and cross difference) with soft string.
4. Thicker grip. I used to use thin overgrip. I'll try thick overgrip to dampen the vibration
5. Soft string. I don't know if this is correct, with thicker string, such as BG65 (0.7 mm), you need a higher tension to yield the same result as thinner string with lower tension. I am considering BG68ti, BG 66 ultimax or nanogy 98. They all have high shock absorption rating when I saw from the yonex 2011 catalog
6. Technique. I don't know if I have the correct technique or not, LOL. So far, there is no problem with my elbow with other rackets; my nanogy 95 at 24-26lbs lasts about 1.5-2 mo (3 rackets on my bag) and snap in the middle, indicating I hit at the right spot, however I don't know if I hit the birdie flat or a little bit slicing.
Once again, thanks a lot guys. Hopefully, I don't post on the wrong thread, it is MX 80 thread, and I want to have my MX 80 as enjoyable as my other rackets again, as well as other people who have the same elbow problem when playing with MX 80.
04-15-2012, 10:53 PM #1977
I think thicker strings do help because it generates a duller feeling than it's thinner string counterparts which generates better feeling, inducing more feedback to arm.
Mind you thicker strings won't help if you always mishit or hit the rim.
04-15-2012, 11:27 PM #1978
I see, will try for the thicker string. Thx cillu
04-16-2012, 01:44 AM #1979
04-18-2012, 10:34 AM #1980
I had (the second) mx80 with 66um at 25 lbs delivered yesterday and had a 3 hours club night with it.
BG66UM on x80 is obscene! Incredible sharpness and power.
Thanks Yonex for supplying the best string for mx80.
04-18-2012, 11:03 AM #1981
Working on the forearm muscles and triceps could help.
To unleash the power of mx80 you need a fast and short swing with powerful arm pronation - or what is referred to as "wrist power".
There are lots of training exercises on the net (youtube), including exercises designed to help you recover from tennis and golfer elbow. In this forum I came across some great tips too. Sorry I don't have links
Have a look at Paul's armchair exercises, these are great because you can do them while getting fat on your armchair :
... and do some diggin Cheers!
04-18-2012, 11:10 AM #1982
My exercise involves 2 days of playing tennis
After doing this I found the 3u MX80 felt so much lighter than before and my TPro is now too light!
04-18-2012, 09:45 PM #1983
Guilty again, not did some searching first before asking questions. He he. Thanks anyway for your help.
I consider my self has more than average wrist power, judging by several types difficult drives shots I make, effortless back to back clear. I also exercise with 160g trainer racket and recently with Lee Jae Bok style which uses a head covered racket. Boy, Lee Jae Bok style is much harder than the trainer racket. May bee it is not enough training. I'll try to find specific training to lessen the tennis elbow problem.
I'm just curios if MX 80 is the caused of my elbow pain, because, I have no problems at all before with stiff rackets, such as BS10.
04-19-2012, 09:25 AM #1984
The MX seems to transfer more of the shock than the BS. I've had the same problem, used the BS10 and got the MX - and got shoulder problems. Imop it's a racket only suited to near-pro players with good physical levels, with exceptions of course....doesn't help that I really hate the feeling of a stiff racket with soft strings, so anything below 27lbs is unthinkable for me^^
Anyhow, do some exercises for your upper arm, as the biceps&triceps stabilize the elbow. 3 sets once or twice a week should be enough (just curls for the biceps and dumbbell extensions for the triceps)...
BraveSword09 liked this post
04-19-2012, 06:42 PM #1985
My first run with the mx80 gave me a sore shoulder and elbow due to the stiffness. 2 days later: no problem. Today i played 3 hours with the mx80 inclyding sone fierce smashing sessions and i feel no issues.
I guess its personal whether you get the elbow/shoulder and same for the duration thereof.
Small detail, i train my arms a lot in the gym.
04-19-2012, 06:47 PM #1986
You probably have the muscle to absorb the 'regular' shock/vibration the MX transfers, and needed some time to get the timing down correctly (in the beginning, you'll usually have much more vibration because more shots are mistimed/mishit slightly).
04-21-2012, 06:46 AM #1987
At over 26lbs the shock is much worst... and there's ringing if you misshit.
A very stiff shaft, stable head plus high tension means there's nothing to cusion the shock.
The BS10 is not quite the same - not as head heavy, not the same head stability and the shaft is not as stiff... therefore gives less trouble.
04-21-2012, 09:44 PM #1988
MX80 is my favourite racket. It's the best one ive ever tried.
04-21-2012, 11:21 PM #1989
But gotta have it at a high tension (above 28lbs), like as someone mentioned,
low tension on a stiff racket feels a bit funky. I'd like to try the 66UM some day
but hear poor things about the durability. nbg98's durability and tension holding
is excellent. Haven't snapped a set yet.
FS/FT: Victor Meteor MX80 (MY)By mizivincible in forum Buy & Sell - Read the rules sticky before you postReplies: 9: 03-31-2012, 03:43 PM
By vtnam007 in forum Buy & Sell - Read the rules sticky before you postReplies: 2: 02-12-2012, 12:18 AM
By kenny_eng in forum Buy & Sell - Read the rules sticky before you postReplies: 1: 12-20-2011, 10:24 AM
WTB: Victor Meteor MX80By KB@TB Em in forum Buy & Sell - Read the rules sticky before you postReplies: 0: 07-17-2011, 07:46 AM
WTB: Victor meteor MX80By araz916 in forum Buy & Sell - Read the rules sticky before you postReplies: 0: 05-25-2011, 03:07 PM