Results 256 to 272 of 3109
Thread: Victor fans club
05-17-2011, 08:11 PM #256
Many people believe the handle mass is irrelevant to the swing, but IMO, it's still important as it is part of the swing because the hand is not static but it is moving thru the stroke during the swing.
Otherwise, why would the manufacturers use lead weights in the handle core to "balance" their rackets in the final phases of production.
I've found that even grips of weights differing by 1-2g can affect the swing feel of a racket.
05-17-2011, 08:29 PM #257
Oh yes I agree with you, especially that grip weight and the handle mass can effect the swing feel.
I just dont know how the mass can distributed from oo00oo to 0oooo0, without changing the mass on the handle or the right hand side of the BP. In order to keep the BP constant the weight must be distributed to both direction, therefore the question is whether it can be done by just shifting the weight to the bottom end of the shaft or does it have to involve the wood handle or both?? Can you explain more about the lead weight in the handle??
05-17-2011, 08:41 PM #258
We need to start talking in degrees here though. The distribution of the weight in the head and shaft makes an infinitely bigger difference than 1-2g of overgrip or handle weight.
"Otherwise, why would the manufacturers use lead weights in the handle core to "balance" their rackets in the final phases of production."
Because you cannot adjust the BP of a racket's head once it comes out of the mould. If there is a variance outside of the manufacturing tolerance, you need to adjust for that somehow and you can't do that to anything but the handle.
05-17-2011, 09:20 PM #259
Yes, surprise surprise, if you remove the butt cap, you'll often find lead tape or weight glued inside the handle core. Obviously the wt in the handle is important, otherwise the manufacturers won't bother with this step at all.
Or do you think that manufacturers are "cheating" us by adjusting the balance in this manner if you think the handle wt is not important at all, Maklike?
riffsuad liked this post
05-17-2011, 09:45 PM #260
Last 2 posts above makes perfect sense. Thanks for the insight guys
05-17-2011, 11:33 PM #261
Maklike does have a very valid point. I think what he's saying is that the racket head and shaft, once out of the manufacturing plant are set in properties. After that point, you cannot change the weight or BP since the mould has been caste.
If the racket is supposed to be for example, 305mm BP, but the BP turns out to be 310mm. The manufacturer cannot change the head and shaft, but could simply add weight in the handle to compensate for the heavier head to re-adjust to 305mm BP.
Remember, racket weights are always given a 5g level of leeway (3U is 85g-90g for example) so they could technically add weight to the handle without really going past the designated weight allowance. A 2g difference in weight with an overgrip changed my BP on my VT80 by a whopping 8mm. This just shows how even a slight weight variance can change the BP of a racket considerably.
05-18-2011, 03:47 AM #262
when I use very stiff rackets such as SW35 or even BS10 usually I feel pain in my wrist
but when I use MX80 which is suppose to be the stiffest of all Victor (beside SPR21) this doesn't happen
I ask myself why??? it's almost as easy like when I use SW37 which is medium stiff !!! why ???
05-18-2011, 04:54 AM #263
thanks gents...now i am understand why BS10 somehow feel more head-heavier than mx80 when i play.
05-18-2011, 05:34 AM #264
05-18-2011, 05:44 AM #265
05-18-2011, 06:02 AM #266
I got an 85g MX80 at a pound lower in tension than I normally run, because of it's stiff shaft and 80 hole pattern.
My BS 12 is 88g and I run it at a pound higher than normal because it's head-ligher and more flexible.
You have to adjust your set-up depending on the racket I reckon.
Oh, almost forgot! Behold...................the FRANKENSWORD!
Last edited by Maklike Tier; 05-18-2011 at 06:06 AM.
05-18-2011, 06:20 AM #267
wow ! it's cool ...
05-18-2011, 06:24 AM #268
05-18-2011, 08:02 AM #269
and very heavy!
05-18-2011, 09:49 AM #270
05-18-2011, 08:42 PM #271
05-18-2011, 10:23 PM #272
By Footwork_816 in forum Badminton Rackets / EquipmentReplies: 60: 11-18-2013, 02:33 AM
By Smichz in forum Badminton Rackets / EquipmentReplies: 291: 04-18-2012, 10:17 AM
By charleslml in forum Badminton Rackets / EquipmentReplies: 26: 03-14-2011, 05:45 PM
By thunder killer in forum Badminton Rackets / EquipmentReplies: 1: 08-02-2008, 09:10 AM
By Smichz in forum Badminton Rackets / EquipmentReplies: 125: 11-17-2007, 11:06 AM