Results 1 to 17 of 17
05-27-2011, 01:54 PM #1
lead tape - debunked in 4 easy steps
People/Manufacturers sometimes use lead tape on the wood handle of a badminton racquet to obtained 'desired' weight/balance.
Here is an argument (http://en.wikipedia.org/wiki/Argument) to suggest that lead tape is virtualy as useful as putting extra rings on your playing hand:
Consider 'the system' as your arm, wrist, hand and racquet.
The racquet's handle has x grams of lead tape underneath the grip - This is the normal configuration.
Ignoring the comfort factor and coefficient of friction of the lead tape etc etc, considering ONLY the effect of the lead tape on the balance and weight of the racket:
- There is no difference having the lead tape underneath or on top of the grip.
- There is no difference to having the lead tape attached to the hand or the grip, as long as it meets hand and grip in the same fashion
- By choosing a suitable weight and placement of lead tape, it is possible to replace the lead tape (with e.g. finger rings), such that the weight and balance of 'the system' is unchanged.
Applying lead tape can be equivalent to adding finger rings.
We now have reached the point where proponents of lead tape MUST ACCEPT that adding weight to you hand/fingers (ie something external to the racquet) has the same effect (or else they must point out some problem with the proposition and conclusion).
people add lead tape because it changes the (feel of the) head-heaviness of the racquet.
If prop. A is true, and prop. 1-3 are true, the (feel of the) head-heaviness of the racket can be altered without touching the racquet at all!
Q: But if you put rings on your hand, your hand moves when you change grip, therefore it cant be the same.
A: Only consider one grip where it is the same - the logic will follow through
Q: placing the lead tape on outside of the grip moves it further awayf from the shaft axis so it does affect the balance of the system.
A: Two points to this.
One: The balance difference is orthogonal to the longitudinal direction we are interested in.
Two: The difference between over/under grip is minimal anyway.
Last edited by amleto; 05-27-2011 at 02:01 PM.
05-27-2011, 06:15 PM #2
Spoken like a true scientist ... Now on to the lab .
Adding rings to your fingers doesn't make your racket feel lighter, improve/affect handling. The only point you keep looking at is the point of impact or are you gripping tightly 100% of the time??
Last edited by demolidor; 05-27-2011 at 06:19 PM.
05-27-2011, 06:27 PM #3
I dont understand the question - please re-state.
05-28-2011, 09:04 AM #4
They way I see it is only at the time you grip tightly it becomes one which most of the time only occurs when you're winding up at the final stage of your swing. The rest of the time it balances on your fingers doesn't it when you're only holding it with a relaxed grip? And during this "rest of the time" rings on your finger have no influence on the racket if only because they will be on the bottom/side of the handle.
A lot has been written about countering the balance with lead tape in tennis (not that I've based anything on it so far since I'm still reading up but to say it has zero effect is not really valid)
I see mention of a 4 inch distance from the buttcap below, above or around you could apply it having different effects. Have also seen mention of a difference in applying it on the outside or inside of the handle ...
Last edited by demolidor; 05-28-2011 at 09:11 AM.
05-28-2011, 09:22 AM #5
What they are apparently saying is adding leadtape at that 4 inch mark doesn't increase/affect swingweight because it is the axis of rotation(?).
Should probably read some more since I haven't occupied myself with messing around with leadtape etc. and I dropped physics a long time ago . Perhaps I can mess around a bit today with a broken racket that had no lead tape on the handle (the Forza) and try putting some fishing lead inside with cotton balls (as I just read in one of the tennis discussions) ...
Just through experience in casually swinging around with a modded (without leadtape, mostly athletic tape to the buttcap and a couple of overgrips, no stock grip) to 275mm strung AT700 it feels completely different to a regular one.
05-28-2011, 09:55 AM #6
I specifically mentioned different grips/hand placements - it's irrelevent to the argument.
You cant argue at all that adding extra grips changes the feel of the swing because it drastically changes the diameter of the grip and so will feel totally different because your muscles/tendons are contracting in different states.
Last edited by amleto; 05-28-2011 at 10:01 AM.
05-28-2011, 10:08 AM #7
Then perhaps you can mess around with this tool: http://twu.tennis-warehouse.com/lear...ionReverse.php
If I add the weight at the 4 inch mark the swingweight remains unchanged and the balancepoint decreases by 2.1% whilst the overall weight increases by 3.4%. Add it lower, for 3gr. the weight increases 3.4%, the balancepoint decreases 3.2% and the swingweight increases (max) ~1% ...
Regarding the grip, if it wasn't equal to stock it was barely bigger (remember the original had been removed)
Last edited by demolidor; 05-28-2011 at 10:19 AM.
05-28-2011, 11:37 AM #8
Probably the best thread so far and by chance includes the following:
Re: Adding Lead Tape
Reply #31 - Feb 14th, 2005, 3:45pm
I'm new to this so I'm sure someone (or maybe everyone) will tell me I'm being silly but what would happen if you added weight not to the racket but to your hand, would the racket play the same yet add weight which may help with the shoulder. ???
Back to top
View Profile IP Logged
Re: Adding Lead Tape
Reply #32 - Feb 17th, 2005, 5:23pm
> would the racket play the same yet add weight which may help with the shoulder
Your hand isn't very efficient at transferring momentum directly to the ball, which is another way of saying, you would have to work as hard, for less benefit. The reason for the lack of efficiency, is that the ball doesn't dwell on the racquet for very long. While it does, the racquet head decelerates, which twists the handle in your hand. The give in your hand, during ball contact, interferes with transmission of momentum, to the ball.
As for your shoulder, you are better off, with the weight on your racquet. Momentum again. The greater the weight on the racquet, the less transfer to your arm, on impact with the ball.
Last edited by demolidor; 05-28-2011 at 11:48 AM.
05-28-2011, 12:13 PM #9
Just messing around with a racket I do get your point though about rings on hand. Purely for that particular moment adding rings instead of leadtape should have more or less the same effect (assuming the transfer in badminton is more efficient than the above simply because a shuttle doesn't have nearly the same impact) only the remaining time the rings on your hand don't have the same benefit in terms of reduced bp as leadtape would have (in actual and/or perceived headheaviness).
Ah dinner time, no wonder was feeling a little lightheaded already
Last edited by demolidor; 05-28-2011 at 12:15 PM.
05-28-2011, 03:02 PM #10
One thing I couldn't find though: what weight was your 296mm Panda racket according to the specs? With or without the leadtape the swingweight might not be so different ... Using the tool with a random weight of 85gr removing 5gr. of imaginary leadtape around the 3 inch mark and having put in 86gr. swingweight originally the new swingweight is still 86 gram but the bp has moved up to 310mm.
Probably flawed reasoning in there somewhere since we don't know and never will know the original swingweight and what a 296mm at the same weight without leadtape would have as a swingweight. Perhaps this would work for a badminton racket as well: http://twu.tennis-warehouse.com/lear...wingweight.php
Last edited by demolidor; 05-28-2011 at 03:16 PM.
05-28-2011, 03:17 PM #11
As ManU get's completely outclassed , ok time to watch the game .
And naturally they score the equalizer at the very moment
Last edited by demolidor; 05-28-2011 at 03:19 PM.
05-28-2011, 07:51 PM #12
But similar to choking up the racket doesn't adding weight below the earlier mentioned 3-4 inch mark impact the handling by acting as counterweight? I assume that is what Apacs is trying to do with that one particular model?
Last edited by demolidor; 05-28-2011 at 07:58 PM.
05-28-2011, 08:58 PM #13
Choking up of course effectively shortening the racket which is the main factor [I submitted but the connection apparently timed out while I was away ]
Last edited by demolidor; 05-28-2011 at 09:01 PM.
05-28-2011, 10:23 PM #14
The presumption for proposition 2 ("as long as it meets hand and grip in the same fashion") cannot hold except in a completely rigid system. Consider the transition of your fingers on the grip when playing a netshot vs a flick.
05-29-2011, 04:55 AM #15
Good post amelto!
I think the effect is different in tennis becasue a tennis racket weighs more and there is more tension in muscles throughout the stroke, the tennis ball weighs more. Also a lot more lead tape will be used.
In badminton there shuld be very little tension.
The effect of swingweight is roughly related to a formula in physics where you measure the weight(mass to be precise) times distance from hand. As the mass added would be at the handle it wouldn't change the fact that there is still a a certain weight of certain distance from handle thats creating the head heavy swing feel.
Ironically as you grip the racket loosely I suspect if it did have any minimal effect it would actually make the racket more 'swingy', less stable
05-29-2011, 06:50 AM #16
05-29-2011, 07:06 AM #17
(15mins) The only point in customizing your badminton racket I see is to make each of them (of the same model) feel the same when you pick them up, a natural extension of your arm if you will. The actual handling should hardly differ ... (?)
By Wukong in forum GripReplies: 84: 07-09-2013, 12:19 PM
By Patrick in forum Badminton Rackets / EquipmentReplies: 14: 12-30-2011, 04:24 AM
By dollargood in forum Market PlaceReplies: 21: 07-19-2010, 08:57 AM
By TrunkZ69 in forum Badminton Rackets / EquipmentReplies: 3: 05-27-2001, 09:04 PM