does this hand suited g4 or g5?

Gold- · 11-06-2009, 04:33 AM

the first picture is about 8.4cm and the second pic is around 18cm
ruler use are 15cm

Gold- · 11-06-2009, 07:12 AM

does anybody have an estimated length of finger and palms like i have and which size of grip do u use,g4 or g5? and wad would u recommend for me?

jchan04 · 11-06-2009, 12:35 PM

i think its all about personal preference.

Tornoni · 11-06-2009, 03:17 PM

Quote:

Originally Posted by jchan04

i think its all about personal preference.

Agreed.

What do you use now? g4 or g5?
How do you feel?
There no std on which size to go.

If I were you, I will go for g4.

Matt · 11-06-2009, 03:28 PM

G4 is most likely your best bet. I didn't need the ruler rule but just using it since you mentioned it, in both instance, my hand is about almost a CM shorter and I use G4.

I used to use a G5 but later on I realized that G5 was just too small for may hand and was affecting my gameplay. A friend of mine advised me to go G4 since before because I have slightly larger hands than him and he used G4 but I did not take his advise until later on.

I would say it's more about what your hand size is then size handle can be chosen. In a way, think about it as getting a pair of shoes.

Gold- · 11-06-2009, 06:20 PM

thx again.. cus previous post did not update pic so it may be unclear how 'big' my hand was. now with a better description is better for u guys to advise. and thx again..

cooler · 11-06-2009, 06:41 PM

it depends a lot of things.....

as a starter, what kind of overgrip r u planning to use
plus we dunno how u wrap the grip.

Gold- · 11-06-2009, 06:47 PM

if for g4 i will use a replacement grip about 1/4 overlapping. i like using just the plain overgrip than a replacement grip but it will cause blister.if i use overgrip i will make 2/4 overlapping. is there a way to solve the blister if i were to use an overgrip?

todjo · 11-07-2009, 08:53 AM

Quote:

Originally Posted by Gold-

if for g4 i will use a replacement grip about 1/4 overlapping. i like using just the plain overgrip than a replacement grip but it will cause blister.if i use overgrip i will make 2/4 overlapping. is there a way to solve the blister if i were to use an overgrip?

The size of my hand is about the same with yours. I prefer g5 & use overgrip also at 2/4 overlapping. I think, solving the blister is about choosing the right surface of your overgrip. A smoother or softer surface might help. Good luck.

Matt · 11-07-2009, 01:55 PM

For me, I put a Yonex super grap on top of my G4 with 1/2 overlap to make a full double layer overlap.

11-06-2009, 04:33 AM	#1
Gold- Regular Member Join Date: Aug 2008 Location: singapore Posts: 246	does this hand suited g4 or g5? the first picture is about 8.4cm and the second pic is around 18cm ruler use are 15cm Last edited by Gold- : 11-06-2009 at 04:40 AM.

11-06-2009, 03:28 PM	#5
Matt Regular Member Join Date: Apr 2002 Location: Richmond, BC Posts: 4,629	G4 is most likely your best bet. I didn't need the ruler rule but just using it since you mentioned it, in both instance, my hand is about almost a CM shorter and I use G4. I used to use a G5 but later on I realized that G5 was just too small for may hand and was affecting my gameplay. A friend of mine advised me to go G4 since before because I have slightly larger hands than him and he used G4 but I did not take his advise until later on. I would say it's more about what your hand size is then size handle can be chosen. In a way, think about it as getting a pair of shoes. Last edited by Matt : 11-06-2009 at 03:31 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Grip size: Any way to go from G4 to G5?	sumbadder	Grip	8	08-06-2007 04:40 PM
decide G4 or G5	niel.dan	Equipment	38	07-23-2006 03:42 PM
MP99- 3U (G5 or G4)?	twlih	Racket Recommendation / Comparison	4	04-05-2006 10:04 AM
Can you really tell the difference between a G4 and G5 grip?	tcstay	Grip	8	10-02-2004 10:35 PM
Changing a G5 grip to a G4 grip	James	Grip	6	07-18-2001 02:20 AM

11-06-2009, 07:12 AM	#2
Gold- Regular Member Join Date: Aug 2008 Location: singapore Posts: 246	does anybody have an estimated length of finger and palms like i have and which size of grip do u use,g4 or g5? and wad would u recommend for me?

11-06-2009, 12:35 PM	#3
jchan04 Regular Member Join Date: Feb 2008 Location: Mississauga, Canada Posts: 604	i think its all about personal preference.

11-06-2009, 06:20 PM	#6
Gold- Regular Member Join Date: Aug 2008 Location: singapore Posts: 246	thx again.. cus previous post did not update pic so it may be unclear how 'big' my hand was. now with a better description is better for u guys to advise. and thx again..

11-06-2009, 06:41 PM	#7
cooler Regular Member Join Date: Apr 2002 Location: Used gopher hole Posts: 19,811	it depends a lot of things..... as a starter, what kind of overgrip r u planning to use plus we dunno how u wrap the grip.

11-06-2009, 06:47 PM	#8
Gold- Regular Member Join Date: Aug 2008 Location: singapore Posts: 246	if for g4 i will use a replacement grip about 1/4 overlapping. i like using just the plain overgrip than a replacement grip but it will cause blister.if i use overgrip i will make 2/4 overlapping. is there a way to solve the blister if i were to use an overgrip?

11-07-2009, 01:55 PM	#10
Matt Regular Member Join Date: Apr 2002 Location: Richmond, BC Posts: 4,629	For me, I put a Yonex super grap on top of my G4 with 1/2 overlap to make a full double layer overlap.