Separate names with a comma.
Looks like the string stripping in your clamps, make sure they are properly tightened.
It looks like there is still some plastic in between the string and frame so I'd argue you don't need to hurry. As for changing the grommet, those...
My bad, I was thinking 24 indeed
I've had one of these strung at 11 kg (so about 26 pounds) for at least 3 years and it doesn't show any sign of damage despite seeing a decent...
BG80 is a stiff string, it probably loses a great deal of tension after lockout. Maybe try to pull it twice to take out some of that pesky tension...
If it's just a paint chip and the racket isn't damaged I wouldn't bother with it too much, I think it's more important to have your supports in...
There's no hard truth there, many people prefer many different things. Still, I think lowering the tension by 0.5 kg could do what you are looking...
It looks very neat ! Are you going short side to B10 for the bottom 2 crosses and long side to B11 and then all the way to the top ?
Yes. Unless that bottom knot is a starting knot, but that seems improbable.
That is 20-22 lbs
They might be different version, since they don't have the same hole pattern (this one is 72 hole, the other is 76) Looks like the top-most cross...
Same as the old ones, but i really doubt that it's the source of your problem
:( Did you cut the new grommets so they'd be the right length ?
I have never noticed any difference after changing grommets. What is your racket? Did it have special grommets ?
PS 3600 is a solid choice, but it doesn't come with universal fixed clamps, so you'd have to spring for additional clamps.
What's weird is the sticker seems to be placed the same as on my PS3600, and the calibration on mine is spot on. Definitely test that scale (with...
I agree, that looks like damage from playing, it would explain why it's in the middle of the stringbed too.
Has anyone tried the racquetart inks ? Are those any good ?
After you pull your first 10 crosses, are you not supposed to do the last main with the long side before clamping it and going to the short side ?...
I removed it from just one side, as it doesn't prevent you from stringing the bottom cross, even if you use a load spreader.
