Kawasaki Master900 & King Spider

NorthGuy

Regular Member
Just got these 2 in the mail. First impressions:

King Spider:
As mentioned in another thread. The big question is quality control. I saw that with this racket. It came with a large scratch at 3oclock from factory. Not a huge huge deal for me but the M900 and Spider are their 2 most expensive rackets. So you would expect premium quality.

All in all it was nice to string. The 4 and 7oclock region seemed more cluttered than I was used to. Especially on the M900. But on the Spider, the top holes are staggered VERY exaggerated. Usually they are staggered by a 1/4 or 1/2 grommet. These were staggered by an entire grommet. So it looked a little crazy but definitely easier to pull the string!

Master 900:
Looks very sharp with it's hexagon type frame. Definitely and eye popper. I hated stringing this one because NO HOLES were staggered. They all were perfectly centered. So now that everything has been staggered so long, it's hard to go back. Also as I said before, the 4&7oclock region just seemed so cluttered. It was very hard to pull the string through without winding. I'm not a pro stringer, so I can't put my finger on it, but it seemed too much and more difficult than normal.


Won't be hitting till later tonight.
 

Attachments

  • PXL_20250415_182907450.jpg
    PXL_20250415_182907450.jpg
    971.3 KB · Views: 6
  • PXL_20250415_224403611.MP.jpg
    PXL_20250415_224403611.MP.jpg
    998.3 KB · Views: 6
  • PXL_20250415_224425425.MP.jpg
    PXL_20250415_224425425.MP.jpg
    682.1 KB · Views: 6
  • PXL_20250415_224435377.jpg
    PXL_20250415_224435377.jpg
    704.7 KB · Views: 6
  • PXL_20250415_224444821.MP.jpg
    PXL_20250415_224444821.MP.jpg
    831.1 KB · Views: 6
  • PXL_20250415_220752542.jpg
    PXL_20250415_220752542.jpg
    888.4 KB · Views: 6
Back
Top